Not if he has CV-Joints on them! Clive Averill has a CV-Joint upgrade to replace Rotoflex couplers on cars so equipped and I am led to believe that there is a kit from Canley Classics but that is all I know about that one. The one from Clive uses VW Rabbit CV-Joints.
Joe -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark J Bradakis Sent: Sunday, December 27, 2009 9:23 PM To: [email protected] Subject: Re: [Spits] "CV-Joint" driveshaft Joe Curry wrote: > I don't know which CV-Joints your car has because there are a lot of cars > that they could have been taken from, but typically, one side of the CV > Joint has a rubber "gaiter" attached to it. I'd guess he has the standard driveshaft found on all the Spits of that vintage. There is no rubber boot, but I seem to recall that there is a threaded collar one can coax off and apply grease to the joint. It has been a while since I've worked on one, most of my recent experience is with just the 2 U-joint shafts. mjb. You are subscribed as [email protected] [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive _______________________________________________ Support Team.Net http://www.team.net/donate.html You are subscribed as [email protected] [email protected] http://autox.team.net/mailman/listinfo/spitfires http://www.team.net/archive
