Todd,

New Jersey addresses this issue.

The NJ Uniform Construction Code, N.J.A.C. 5:23, specifically N.J.A.C.
5:23-3.21(c)3.i. limits R-5 (One and Two Family Dwellings or Single
Family Townhouses not more than three stories in height) Buildings of
Type VB unprotected wood frame construction to 4,800 square feet in area
per floor, and Buildings of Type VA protected wood frame construction to
10,200 square feet in area per floor.

In both cases where an area increase is proposed using suppression
pursuant to N.J.A.C. 5:23-3.21(c)3.i.; :the area limitation shall be
permitted to be increased 200 percent for one and two story buildings
and 100 percent for buildings more than two stories in height where a
building is equipped throughout with an automatic sprinkler system
installed in accordance with NFPA Standard 13."

Another option is open perimeter. (I'll cite the particulars if asked)

N.J.A.C. 5:23-3.21(c)3.i adds a new section R-300 to 2006 IRC/NJ. The
document is online at;

http://www2.iccsafe.org/states/newjersey/

John Drucker
Fire Protection Subcode Official (AHJ)
New Jersey
  

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Todd
Williams - work
Sent: Monday, August 20, 2007 12:09 PM
To: [email protected]
Subject: large single family houses

What's the latest poop on protecting large single-family residences? 
It doesn't seem that 13D would be appropriate for the structure, but I
don't see anything in any of my Codes that would modify it.

Todd G. Williams, PE
Fire Protection Design/Consulting
Stonington, Connecticut
860-535-2080
www.fpdc.com 

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email
to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to