You can find some of this kind of information on Viking's website under TECHNICAL DATA.
Their website is http://www.vikingcorp.com/ You may not actually find a diagram with the pump arrangement tied together to the sprinkler systems but there should be enough info on their site for you to put it together. Craig L. Prahl, CET Fire Protection Group Mechanical Department CH2MHILL Lockwood Greene 1500 International Drive PO Box 491, Spartanburg, SC 29304-0491 Direct - 864.599.4102 Fax - 864.599.8439 [EMAIL PROTECTED] http://www.lg.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Aydin ÖZKAYA Sent: Monday, December 10, 2007 9:57 AM To: [email protected] Subject: "Fire Pump+Jockey Pump+Wet Alarm Valve" Combined Riser Diagram Dear All, I'm looking for an explicit literature reference, showing how Fire Pump+Jockey Pump+Wet Alarm Valve are connected (piped) all together, as Pump+a combined riser diagram, based on NFPA or FM, For instance, if you look up NFPA 20, in A-2-19.3 you will notice that pump connection arrangement is up to the supply header, but neither indoor/outdoor hose, nor alarm valve connections are shown all in a single riser diagram. Rgds. Aydın ÖZKAYA KARİNA Design, Consultancy and Training Services Ltd.Co. www.karina.gen.tr <http://www.karina.gen.tr/> _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
