Hello Timothy,

We have the Rigid, Reed, and one of those from Argco. After about 100 grooves 
on Sch 40 the Argco one had to be rebuilt as it stripped the drive feed screw 
for the roller depth. The guys were used to 1 turn down with the others and you 
can not do that with this one.  Reed for a In-Air OR Machine, Rigid for in air 
only.

Monday, April 7, 2008, 10:14:36 AM, you wrote:

> Rigid is better but more expensive. If you're going to use it a lot then buy
> Rigid, if not Reed. You might also check out the one that ARGCO offers.

> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Tom Duross
> Sent: Monday, April 07, 2008 6:48 AM
> To: [email protected]
> Subject: Fitter Question


> Maybe more suited for chat but I'll throw it out here.

> I need to get an in-place groover for an upcoming job.
> I've borrowed a friends rigid before but it's gone.
> Can any fitters share their likes and dislikes?  
> Rigid vs. Reed, or others...

> I wish they made one for a 700 as I have to groove old 4" and 6" sch. 40.
> I've got to cut-in about 12 FCV's 8-10' in the air. All recommendations and
> advice accepted. (I don't like roustabouts)

> Tom
> GRS
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

> To Unsubscribe, send an email to:[EMAIL PROTECTED]
> (Put the word unsubscribe in the subject field)


> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
> http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

> To Unsubscribe, send an email to:[EMAIL PROTECTED]
> (Put the word unsubscribe in the subject field)



-- 
Best regards,
Charles Thurston CET
Coastal Fire Protection
 Coastal                            mailto:[EMAIL PROTECTED]


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum

To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)

Reply via email to