Hello sprinklerforum, I ran into a system installed way before my time and do not understand something. The Fire pump is all plumbed in 6", The Pump Test header has three 2 1/2" outlets. There is about 30 feet of pipe between the test header valve and the test header. The test header is located about 12 feet below the pump outlet.
My question is: Why would they come off the 6" test header line valve step the pipe UP to 8" pipe for that 30 feet then reduce it back down to 6" to connect to the test header? What am I missing? -- Best regards, Charles Thurston mailto:[EMAIL PROTECTED] Coastal Fire Protection _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
