I'm certain the Flexhead brand has been specifically checked for compatibility with Blazemaster piping systems and is listed as such in the Blazemaster Compatibility List available on their website.
There is also a list of items you should NOT use or allow near CPVC that warrants reading if you use this product. http://www.systemcompatible.com/products-Americas.asp George Church Rowe Sprinkler -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of scott mitchell Sent: Sunday, June 29, 2008 8:28 PM To: [email protected] Subject: RE: Flexhead on CPVC It would be prudent to check with the CPVC manufacturer to see if they'll back their product being used with the flex product. J. Scott Mitchell, PE Fire Protection Engineer --- On Sun, 6/29/08, Top Myers <[EMAIL PROTECTED]> wrote: From: Top Myers <[EMAIL PROTECTED]> Subject: RE: Flexhead on CPVC To: [email protected] Date: Sunday, June 29, 2008, 6:56 PM I agree with John, compatibility is a very tricky issue. UL does no compatibility testing of the different components that are in a system. I would make sure that the manufacturer of the flex head warrants that his product is compatible with CPVC when you are doing a CPVC system. Top Myers RelMark Group 961 Pottstown Pike Chester Springs, PA 19425 610-321-2415 - Cell 610-952-0965 [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Drucker Sent: Friday, June 27, 2008 8:01 PM To: [email protected] Subject: RE: Flexhead on CPVC Absolutely correct ! Interestingly despite all the verbal claims by contractors the requested documentation is rarely produced and the proposal soon abandoned. Its like being in line for parachutes, no one wants to be at the end of the line. John Drucker Fire Protection Subcode Official (AHJ) New Jersey -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Leyton Sent: Friday, June 27, 2008 7:22 PM To: [email protected] Subject: RE: Flexhead on CPVC Good point. In situations like this, I look at it from a lawyer's perspective - what was the basis for the decision to apply the product this way? If the tech data sheet is mute, I always contact the manufacturer directly and ask if they'll warranty the application in writing or furnish an engineered judgment on their titleblock or letterhead. That usually gets to the bottom line pretty quickly ... Steve Leyton Protection Design & Consulting -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of scott mitchell Sent: Friday, June 27, 2008 4:11 PM To: [email protected] Subject: RE: Flexhead on CPVC If one depends on the listing to determine and state such a conflict, one is walking on thin ice. In other words, don't look at the absence of a restriction in the listing and conclude that "it must be ok". The listing agency does a series of tests/evaluations based on requirements in the applicable standard (NFPA 13 in this case). Unfortunately, if NFPA 13 is ambiguous or doesn't address the arrangement, the listing agency covers by making a blanket requirement such as "must comply with the manufacturers installation instructions and NFPA 13". This passes the buck back to the standard and THE AUTHORITY HAVING JURISDICTION. So, if you ever hear someone state, "It's OK!! It's listed!!!", think twice and ask, "Listed for what? What tests were conducted that prove it's OK to do this?" J. Scott Mitchell, PE Fire Protection Engineer --- On Fri, 6/27/08, Bobby Gillett <[EMAIL PROTECTED]> wrote: From: Bobby Gillett <[EMAIL PROTECTED]> Subject: RE: Flexhead on CPVC To: [email protected] Date: Friday, June 27, 2008, 2:17 PM Make sure you are using the cpvc sprinkler tees, I don't see any other issues as long as listings don't say any different. Bobby Gillett Project Manager [EMAIL PROTECTED] (731)-424-0130 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Todd Williams - FPDC Sent: Friday, June 27, 2008 1:58 PM To: [email protected] Subject: Flexhead on CPVC I'm working on a project where the client wants to use flexheads (or one of the clones) off CPVC pipe. Is there any restriction on this? Could the bending of the flexhead potentially put some weird forces on the CPVC pipe and glued fittings that could cause a problem? They claim they do it all of the time, but I've never seen it. Todd G. Williams, PE Fire Protection Design/Consulting Stonington, Connecticut www.fpdc.com 860.535.2080 _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) __________ Information from ESET NOD32 Antivirus, version of virus signature database 3224 (20080627) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 3224 (20080627) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum To Unsubscribe, send an email to:[EMAIL PROTECTED] (Put the word unsubscribe in the subject field)
