Is that the question of the FM, what will happen to the municipal supply when 
the pump is at 150% of its rating?

I never saw posted the original question/concern.

Craig L. Prahl, CET   
Fire Protection 
CH2MHILL
Lockwood Greene
1500 International Drive
Spartanburg, SCĀ  29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
CH2MHILL Extension  74102
[email protected]



-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of ParsleyConsulting
Sent: Wednesday, November 17, 2010 3:21 PM
To: [email protected]
Subject: Re: Fire Pump's

Brad,

I'd like to ask about your comment:

"good sense to waive off sprinkler calcs as meaningless."

Can you help me understand what you're referring to here?

I thought the concern was valid.  The FM appeared to be asking a 
legitimate question, such as "what happens if the flow at 150% of rated 
capacity draws my municipal main down below 20 psi?"  The 2010 edition 
of NFPA-20 addressed this in the sections I quoted Brian.  I wasn't 
there for those ROP/ROC meetings, but the new material was voted in 
almost unanimously.

Reading that new language in NFPA-20, it also brought up a point I 
hadn't considered - isn't there a requirement to test the fire pump to 
that 150% capacity?  I thought NFPA-25 called for that in the annual 
flow testing in 8.3.3.1.  If the municipal main can't supply the water 
to meet that 150% figure I'd ask the same questions, I think.  Perhaps a 
different way than happened for Brian, but I'd ask.

Are you suggesting that such information is irrelevant?
PARSLEY CONSULTING
Ken Wagoner, SET
760.745.6181 voice
760.745.0537 fax
[email protected] <mailto:[email protected]>e-mail
www.ParsleyConsulting.com <http://www.ParsleyConsulting.com>website


On 11/17/2010 11:29 AM, Brad Casterline wrote:
> This FM's problem is
> that he/she has the good sense to waive off sprinkler calcs as meaningless.
>
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to