depending on the quantity and type of hardeners (e.g. epoxies) you may have a H-area.
Scot Deal Excelsior Fire Engineering FPE/PE USA On Thu, Mar 1, 2012 at 8:51 AM, Cory Power <[email protected]>wrote: > We were asked to quote a 4100 sq.ft fiberglass fabrication shop. What > hazard would this be considered as? All I can find in nfpa 13 that could be > applicable is "resin application area" which says Ordinary Hazard Group 2. > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: <http://fireball.**firesprinkler.org/mailman/** > private/sprinklerforum/**attachments/20120301/22273b96/**attachment.html<http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20120301/22273b96/attachment.html> > > > ______________________________**_________________ > Sprinklerforum mailing list > Sprinklerforum@firesprinkler.**org <[email protected]> > http://fireball.firesprinkler.**org/mailman/listinfo/**sprinklerforum<http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://fireball.firesprinkler.org/mailman/private/sprinklerforum/attachments/20120301/682027a1/attachment.html> _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum
