I don't know if Roland is following this thread or not, but.... We all know that a basic design consideration is the one-fire at a time concept. Roland talks about this all the time when we're hit by the "but what if...?" scenarios. I looked for a written reference (since if it's written it must be truer than if just said, even by the same person), but I couldn't find one in the couple of minutes I dedicated to the task. Anyone (Roland) have something? It would be useful over and over.
On Thu, Dec 5, 2013 at 8:24 AM, ampeck <[email protected]> wrote: > These stories are so incredibly funny! And you're right Ron. I drew a > blank when he asked about listing of fittings and that they just had to be > according to the ASME/ASTM/AWWA. I have to hammer that in my head so the > next time I don't look like a deer in the head lights. > > Not about listing or approvals but I think I pissed off a owners fire > engineer, I knew he was one because he couldn't say enough of how long he's > been in the business and how he was the first in Florida or something to > that effect. He asked me why I didn't run ALL the multiple hydraulic > calculations at the same time. There was a truck wash, office, maintenance > bay and small oil storage. When I asked "why?" he said "Well what if > multiple fires develop at the same time?". I literally burst out with "well > if you have multiple fires at the same you have worse problems and the > building is gone!" I further went on to say "sure we could do that but we'd > have to have high pressure, multiple pumps and a much bigger water tank". > The owner was there also, awkward silence for a few seconds and then he > moved on to something else. Only afterwards did I think I should have been > more diplomatic in my answer. > Sent from iCloud > > > On Dec 05, 2013, at 08:26 PM, [email protected] wrote: > > Another thing is the increasing number of AHJ's that think every piece of > material used in a sprinkler system has the "Listed". AHJ's now want to > know where is the listing for the angle iron used In the trapeze hanger or > the listing of flange bolts. I can remember when the only List FDC > available was a 4" 2 way wye type. Best one for me was the AHJ that said we > couldn't use a top beam clamp on a bar joist because it was only listed for > beams. > Ron F > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of John O'Connor > Sent: Thursday, December 05, 2013 7:47 AM > To: [email protected] > Subject: RE: Stockham Fittings > > This reminds me of a conversation with a young FM rep asking what kind of > dielectric fittings we were planning on using where we transition to > galvanized pipe and black pipe. This was shortly after FM began calling for > galvanized pipe on all dry systems. I responded with "the same kind of > transition used between the zinc coating and the steel pipe on every piece > of galvanized pipe". He hesitated, in silence, then caught his error, and > apologized for being stupid. I doubt you will get an apology from this AHJ > for being stupid. Even after these Stockham fittings have served under > pressure for 40 years. What else will these people think up to justify > their jobs? > John O'Connor > National Fire Sprinklers, Nashville TN > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of Forest > Wilson Fire Sprinkler Contractor > Sent: Thursday, December 05, 2013 8:25 AM > To: [email protected] > Subject: RE: Stockham Fittings > > That's wonderful. Now hundreds of dollars must be spent so a local > official can be convinced that these fittings manufactured by a major > industry are suitable for a job installed decades ago. > I suppose the only thing you can do is write to Obama and explain that a > council needs to be appointed to see if these fittings were supposed to be > manufactured because a guy from the city doesn't know. > All at contractor expense, of course > > > Forest Wilson > Fire Sprinkler Contractor > 937-736-0425 > > Notice: > This message is confidential. It may also be privileged or otherwise > protected by work product immunity or other legal rules. If you have > received it by mistake, please let us know by e-mail reply and delete it > from your system; you may not copy this message or disclose its contents to > anyone. Please send us by fax any message containing deadlines as incoming > e-mails are not screened for response deadlines. The integrity and security > of this message cannot be guaranteed on the Internet. > > > -------- Original message -------- > From: [email protected] Date: 12/05/2013 8:39 AM (GMT-05:00) To: > [email protected] Subject: RE: Stockham Fittings > Fittings don't have to be "Listed". If they are that's great but fittings > only have to meet the ASME, ASTM or AWWA publications listed in NFPA 13. I > would think most major brand manufacturers would have met those > requirements. Ya gotta love the enthusiasm of some AHJ's. > Ron F > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of ampeck > Sent: Thursday, December 05, 2013 12:12 AM > To: [email protected] > Subject: Stockham Fittings > > I was wondering if anyone had an idea about listing of early 1970 Stockham > fittings. > > We're doing a renovation and the AHJ had brought up about the fitting > listing and quality. Now it was before my time but even after 40 years > these fittings look in perfect shape. During that time were there > listings/approvals on them? And if so how can I go about finding it? I've > already exhausted google out lol > > I believe it's a none issue of course but you know how it goes. > > Thanks! > Sent from iCloud > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler. > org > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler. > org > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler. > org > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1432 / Virus Database: 3658/6392 - Release Date: 12/04/13 > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler. > org > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler. > org > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler. > org > -- Ron Greenman Instructor Fire Protection Engineering Technology Bates Technical College 1101 So. Yakima Ave. Tacoma, WA 98405 [email protected] http://www.bates.ctc.edu/fireprotection/ 253.680.7346 253.576.9700 (cell) Member: ASEE, SFPE, ASCET, NFPA, AFSA, NFSA, AFAA, NIBS, WSAFM, WFC, WFSC They are happy men whose natures sort with their vocations. -Francis Bacon, essayist, philosopher, and statesman (1561-1626) A problem well stated is a problem half solved. -Charles F. Kettering, inventor and engineer (1876-1958) _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
