Chapter 1 of NFPA 13. 1.1.2 in the 2010 edition, which is when it first appeared. Handbook explanatory text fleshes it out nicely.
Benjamin Young On Thu, Dec 5, 2013 at 12:56 PM, rongreenman . <[email protected]>wrote: > I don't know if Roland is following this thread or not, but.... We all know > that a basic design consideration is the one-fire at a time concept. Roland > talks about this all the time when we're hit by the "but what if...?" > scenarios. I looked for a written reference (since if it's written it must > be truer than if just said, even by the same person), but I couldn't find > one in the couple of minutes I dedicated to the task. Anyone (Roland) have > something? It would be useful over and over. > > > On Thu, Dec 5, 2013 at 8:24 AM, ampeck <[email protected]> wrote: > > > These stories are so incredibly funny! And you're right Ron. I drew a > > blank when he asked about listing of fittings and that they just had to > be > > according to the ASME/ASTM/AWWA. I have to hammer that in my head so the > > next time I don't look like a deer in the head lights. > > > > Not about listing or approvals but I think I pissed off a owners fire > > engineer, I knew he was one because he couldn't say enough of how long > he's > > been in the business and how he was the first in Florida or something to > > that effect. He asked me why I didn't run ALL the multiple hydraulic > > calculations at the same time. There was a truck wash, office, > maintenance > > bay and small oil storage. When I asked "why?" he said "Well what if > > multiple fires develop at the same time?". I literally burst out with > "well > > if you have multiple fires at the same you have worse problems and the > > building is gone!" I further went on to say "sure we could do that but > we'd > > have to have high pressure, multiple pumps and a much bigger water > tank". > > The owner was there also, awkward silence for a few seconds and then he > > moved on to something else. Only afterwards did I think I should have > been > > more diplomatic in my answer. > > Sent from iCloud > > > > > > On Dec 05, 2013, at 08:26 PM, [email protected] wrote: > > > > Another thing is the increasing number of AHJ's that think every piece of > > material used in a sprinkler system has the "Listed". AHJ's now want to > > know where is the listing for the angle iron used In the trapeze hanger > or > > the listing of flange bolts. I can remember when the only List FDC > > available was a 4" 2 way wye type. Best one for me was the AHJ that said > we > > couldn't use a top beam clamp on a bar joist because it was only listed > for > > beams. > > Ron F > > -----Original Message----- > > From: [email protected] [mailto: > > [email protected]] On Behalf Of John > O'Connor > > Sent: Thursday, December 05, 2013 7:47 AM > > To: [email protected] > > Subject: RE: Stockham Fittings > > > > This reminds me of a conversation with a young FM rep asking what kind of > > dielectric fittings we were planning on using where we transition to > > galvanized pipe and black pipe. This was shortly after FM began calling > for > > galvanized pipe on all dry systems. I responded with "the same kind of > > transition used between the zinc coating and the steel pipe on every > piece > > of galvanized pipe". He hesitated, in silence, then caught his error, and > > apologized for being stupid. I doubt you will get an apology from this > AHJ > > for being stupid. Even after these Stockham fittings have served under > > pressure for 40 years. What else will these people think up to justify > > their jobs? > > John O'Connor > > National Fire Sprinklers, Nashville TN > > > > -----Original Message----- > > From: [email protected] [mailto: > > [email protected]] On Behalf Of Forest > > Wilson Fire Sprinkler Contractor > > Sent: Thursday, December 05, 2013 8:25 AM > > To: [email protected] > > Subject: RE: Stockham Fittings > > > > That's wonderful. Now hundreds of dollars must be spent so a local > > official can be convinced that these fittings manufactured by a major > > industry are suitable for a job installed decades ago. > > I suppose the only thing you can do is write to Obama and explain that a > > council needs to be appointed to see if these fittings were supposed to > be > > manufactured because a guy from the city doesn't know. > > All at contractor expense, of course > > > > > > Forest Wilson > > Fire Sprinkler Contractor > > 937-736-0425 > > > > Notice: > > This message is confidential. It may also be privileged or otherwise > > protected by work product immunity or other legal rules. If you have > > received it by mistake, please let us know by e-mail reply and delete it > > from your system; you may not copy this message or disclose its contents > to > > anyone. Please send us by fax any message containing deadlines as > incoming > > e-mails are not screened for response deadlines. The integrity and > security > > of this message cannot be guaranteed on the Internet. > > > > > > -------- Original message -------- > > From: [email protected] Date: 12/05/2013 8:39 AM (GMT-05:00) To: > > [email protected] Subject: RE: Stockham Fittings > > Fittings don't have to be "Listed". If they are that's great but fittings > > only have to meet the ASME, ASTM or AWWA publications listed in NFPA 13. > I > > would think most major brand manufacturers would have met those > > requirements. Ya gotta love the enthusiasm of some AHJ's. > > Ron F > > > > -----Original Message----- > > From: [email protected] [mailto: > > [email protected]] On Behalf Of ampeck > > Sent: Thursday, December 05, 2013 12:12 AM > > To: [email protected] > > Subject: Stockham Fittings > > > > I was wondering if anyone had an idea about listing of early 1970 > Stockham > > fittings. > > > > We're doing a renovation and the AHJ had brought up about the fitting > > listing and quality. Now it was before my time but even after 40 years > > these fittings look in perfect shape. During that time were there > > listings/approvals on them? And if so how can I go about finding it? I've > > already exhausted google out lol > > > > I believe it's a none issue of course but you know how it goes. > > > > Thanks! > > Sent from iCloud > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler > . > > org > > > > > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler > . > > org > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler > . > > org > > > > ----- > > No virus found in this message. > > Checked by AVG - www.avg.com > > Version: 10.0.1432 / Virus Database: 3658/6392 - Release Date: 12/04/13 > > > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler > . > > org > > > > > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler > . > > org > > _______________________________________________ > > Sprinklerforum mailing list > > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler > . > > org > > > > > > -- > Ron Greenman > Instructor > Fire Protection Engineering Technology > Bates Technical College > 1101 So. Yakima Ave. > Tacoma, WA 98405 > > [email protected] > > http://www.bates.ctc.edu/fireprotection/ > > 253.680.7346 > 253.576.9700 (cell) > > Member: > ASEE, SFPE, ASCET, NFPA, AFSA, NFSA, AFAA, NIBS, WSAFM, WFC, WFSC > > They are happy men whose natures sort with their vocations. -Francis Bacon, > essayist, philosopher, and statesman (1561-1626) > > A problem well stated is a problem half solved. -Charles F. Kettering, > inventor and engineer (1876-1958) > _______________________________________________ > Sprinklerforum mailing list > [email protected] > > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
