Seems to me the AHJ's need the education more than the contractors. Ron F -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, September 05, 2014 8:58 AM To: sprinklerforum Subject: Re: Seismic bracing
Oh boy, here we go again. Every time the subject of seismic bracing / protection comes up, it shows that there is a general lack of understanding among contractors and designers (myself included) as to when it is required, what is required, and how to do it correctly. We need more education - just reading NFPA13 is not enough. Can anyone suggest any good classes available out there? Thanks Bill Menster ----- Original Message ----- From: [email protected] To: "sprinklerforum" <[email protected]> Sent: Friday, September 5, 2014 11:10:38 AM Subject: RE: Seismic bracing Some jurisdictions around here require what we call "feel good bracing". They don't require calculations, or that the building be designed to any seismic standard, they just want the minimum bracing. If we want a green tag we have to put it in. I guess in this case the question would be if the only requirement is local dictate can you install at the max spacing and not do any calc's provided it is acceptable to the AHJ? Ron F -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Parsley Consulting Sent: Friday, September 05, 2014 5:11 AM To: [email protected] Subject: Re: Seismic bracing Stephen, I don't believe the AHJ you're dealing with has thought this decision through very carefully. They seem to be equating "seismic bracing" with "seismic protection", which includes such other features as flexible couplings, clearance requirements, seismic separation assemblies, restraint of branch lines, and certain hanger requirements in a building protected against seismic damage. Section 9.3 covers more than just seismic bracing. I would recommend you ask the AHJ if they're going to require all of the features in NFPA 13 for seismic protection, or just lateral, longitudinal and riser bracing. It's also relevant to note that if you're going to provide seismic bracing you have to make sure you comply with 9.3.5.1.2 (2007), which requires the structure to be able to withstand the applied seismic loads. Based on what you've described I would wager a few dollars that they could not do so. And, if you still have a mandate to brace, ask the AHJ to provide the Ss value for the building, per 9.3.5.6.2. Craig Prahl is correct, in that a requirement for seismic protection of a building is based on the location of the building in a seismic zone, and it's occupancy or use. While it isn't a complicated set of data to find and apply correctly, you're not a structural or soils engineer, and that is certainly not your responsibility. This is a bad idea without something more to back it up. You did mention that the building code requires it, can you be more specific? *Ken Wagoner, SET* **Parsley Consulting*** *350 West 9th Avenue, Suite 206 *Escondido, California 92025 *****Phone 760-745-6181* Visit our website <http://www.parsleyconsulting.com/> *** On 9/5/2014 8:31 AM, Steve Sorrell wrote: > Sorry, should have read 2007 edition > > Stephen J. Sorrell, CET > NICET# 77901 Level III > E mail: [email protected] > > Performance Fire Protection, LLC > Corporate Office > 179 Gasoline Alley - PO Box 4510 > Mooresville, NC 28117 > Phone: 704-663-1664 Fax: 704-663-1652 Cell : 704-309-1242 > > Web: www.performancefire.com > Licensed in NC, SC, VA, TN, GA, AL > > "Performance on Every Level." > > > -----Original Message----- > From: Sprinklerforum > [mailto:[email protected]] On Behalf Of > [email protected] > Sent: Friday, September 05, 2014 8:33 AM > To: [email protected] > Subject: RE: Seismic bracing > > The AHJ can't just "require it". His preference is not relevant. Also > seismic bracing is not based on Zones or Maps anymore, hasn't been for quite > a while. > > I'm curious why you're using the 2000 edition of NFPA 13. > > Anyway back to seismic. > > Seismic requirements are determined based on a number of factors originating > out of the Building Code Chapter 16. It's not just an arbitrary decision. > > There needs to be a geotech (soils) report, the building needs to be > classified as to its use/function and you go from there. > > So there are engineering questions to be answered before there a requirement > for bracing is established. > > I've had to provide bracing on new work in an existing building, it made no > sense since the building structure wasn't design for the loading and the rest > of the system was not protected but it was required by the code so it had to > be done. Was it required on the original install, did someone just miss it > assuming the site wasn't in "the zone", who knows. > > There is a lot of misinterpretation on the part of design professionals > regard when it's required and when it's not. > > Craig L. Prahl > Fire Protection Group Lead > CH2MHILL > Lockwood Greene > 1500 International Drive > Spartanburg, SC 29303 > Direct - 864.599.4102 > Fax - 864.599.8439 > CH2MHILL Extension 74102 > [email protected] > > > -----Original Message----- > From: Sprinklerforum > [mailto:[email protected]] On Behalf Of > Steve Sorrell > Sent: Friday, September 05, 2014 8:13 AM > To: [email protected] > Subject: Seismic bracing > > I need some help with a seismic problem. > I am making modifications to a 1970's sprinkler system in NC, we are using > the 2000 ed of NFPA 13. > There is no seismic bracing on this system. > I have had to add some new main in various areas. > The local AHJ is requiring that only the new sprinkler main will need to be > braced. > Does anyone know if this is an actual standards requirement or just a > preference of the local AHJ ? > Obviously I am trying to avoid installing the seismic bracing on this > project. > > > Stephen J. Sorrell, CET > NICET# 77901 Level III > E mail: > [email protected]<mailto:[email protected]> > > Performance Fire Protection, LLC > Corporate Office > 179 Gasoline Alley - PO Box 4510 > Mooresville, NC 28117 > Phone: 704-663-1664 Fax: 704-663-1652 Cell : 704-309-1242 > > Web: www.performancefire.com<http://www.performancefire.com> > Licensed in NC, SC, VA, TN, GA, AL > > "Performance on Every Level." > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl > er.org _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl > er.org _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl > er.org > > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
