BosseJ wrote: 
> Perhaps you could ask Ralphy in the JiveLite thread in these forums,
> https://forums.slimdevices.com/showthread.php?98156-Announce-JiveLite-cut-down-squeezebox-control-application
> if there is any way to force JiveLite to always use the eth0
> 192.168.1.23 IP as the LMS server and never the wireless IP?
> Assuming you compiled from the Github sources, Ralphy's fork, and not
> from Googlecode archive (Triode's original sources).
> 
> BTW, it seems as JiveLite only communicates with the LMS server and the
> LMS server then controls the Squeezelite player software. There seems to
> be no direct connection between JiveLite and Squeezelite. This explains
> why you only loose control ability on the local display of the PI3B+,
> but never on the PC/laptop browser to the LMS web gui. LMS listens on
> all interfaces, if wlan fails it doesn't matter for the  eth0 traffic.
> However, JiveLite chooses one interface for communication with LMS and
> sticks with that. Besides, JiveLite seem to prefer the wlan, perhaps
> because that is the only network route which can provide DNS replies.
> (You could, as a test for this speculation, setup a small DNS server
> elsewhere on your network just to provide replies, a small footprint
> caching DNS will be fine. Then start the PI3B+ without the hotspot
> available and see what gives - check the JiveLite configs for LMS server
> IP etc.)
> 
> edit: you see in this source from Github:
> https://github.com/ralph-irving/jivelite/blob/master/src/jive_dns.c that
> JiveLite monitors the resolv.conf for changes. That's why it overwrites
> the LMS server address in the lua probably when the Pi3B+ connects to
> the hotspot.

I think you have now isolated the real issue which is completely
different to what was originally posted.
I fixed by uninstalling and reinstalling Jivelite but I was using
piCorePlayer which has a version of Jivelite precompiled and is one
click install and / or uninstall.
Given that there is a network bridge in play I cannot see how you will
ever get the phone to control LMS but hey...



VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s
*Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3
-> Onkyo CRN755 -> Wharfedale Modus Cubes
*Dining Room* -> SB Boom 
*Kitchen* -> UE Radio (upgraded to SB Radio)
*Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones
*Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s
Everything controlled by iPeng
------------------------------------------------------------------------
d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051
View this thread: http://forums.slimdevices.com/showthread.php?t=109789

_______________________________________________
Squeezecenter mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/squeezecenter

Reply via email to