If you really want to continue to use the phone as the connection to the
internet then what I would do is.

I’d get a wireless Ethernet router. That’s a router with Ethernet
connection Wan side and normal lan / WiFi onnthe private side.
Then I’d plug a Wireless Access Point configured in client mode into the
WAN port. I’d use this to connect to your mobile hotspot when it’s
available,
I’d rebuild the Pi as a LAN only device and give it a reserved IP from
the private side dhcp server.
Then I’d open and forward TCP 9000 & TCP/UDP 3483 from the WAN interface
to the IP of the Pi. That will let your phone access an Control LMS
The existence of a proper router will ensure that LMS will work with or
without an internet connection.
The port forwarding is safe in this scenario even without password as
there is a further router in play in the form of the hotspot.
I appreciate you have added 2 boxes into the equation but this will work
and doesn’t involve an additional SIM card.



VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s
*Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3
-> Onkyo CRN755 -> Wharfedale Modus Cubes
*Dining Room* -> SB Boom 
*Kitchen* -> UE Radio (upgraded to SB Radio)
*Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones
*Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s
Everything controlled by iPeng
------------------------------------------------------------------------
d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051
View this thread: http://forums.slimdevices.com/showthread.php?t=109789

_______________________________________________
Squeezecenter mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/squeezecenter

Reply via email to