Good. No you do not need to enable it. If you had it enabled then it may cause problems..
tor 2003-03-27 klockan 12.06 skrev Raja R: > No .. it is not enabled. DO I need to enable it ? > Regards, > Raja. > > > -----Original Message----- > From: Henrik Nordstrom [mailto:[EMAIL PROTECTED] > Sent: Thursday, March 27, 2003 4:03 PM > To: [EMAIL PROTECTED] > Cc: 'Patrick Kwan'; [EMAIL PROTECTED] > Subject: RE: [squid-users] hotmail problem > > > Have you enabled any HTTP anonymisation features in Squid? > (header_access in Squid-2.5). > > Regards > Henrik > > tor 2003-03-27 klockan 10.59 skrev Raja R: > > Yes, it works fine when I do not use squid and am behind the same NAT > > gateway. Ok, that indicates that NAT gateway is not blocking anything. > Right > > ? > > cache.log does not say anything ab't the hotmail requests. I am attaching > > the access log for hotmail requests . squid does not seem to be denying > > anything, but the page does not load, nor does it give any error . IT says > > "DONE" with no display. It always comes to > > http://login.passport.net/uilogin.srf?id=2 and gets DONE there . > > Pls. check and give hints to solve the problem. I am despo. > > > > Regards, > > Raja. > > > > > > -----Original Message----- > > From: Henrik Nordstrom [mailto:[EMAIL PROTECTED] > > Sent: Thursday, March 27, 2003 1:53 PM > > To: [EMAIL PROTECTED]; 'Patrick Kwan' > > Cc: [EMAIL PROTECTED] > > Subject: Re: [squid-users] hotmail problem > > > > > > On Thursday 27 March 2003 08.21, Raja R wrote: > > > No. I tried .. doesn't help...but I have something interesting to > > > tell.. the same squid config works fine for hotmail when the proxy > > > is on a dial-up ISDN line but does not work if the proxy > > > is put behind a firewall with static NAT. So just wondering If i > > > have to allow some specific ports on the firewall to the proxy from > > > outside for hotmail to work. I am attaching a text file to give u > > > all clues to see where the problem is . This is the source of the > > > hotmail page when it says DONE. It clearly shows breakage.. > > > Everytime it breaks there..even after refreshing (ctrl-refresh, > > > shift-refresh, etc) ..PLS. HELP > > > > Does it work if you do not use Squid, still behind the same NAT > > gateway? > > > > What does Squid access.log and cache.log say about the requests when > > it fails? > > > > Regards > > Henrik > -- > Henrik Nordstrom <[EMAIL PROTECTED]> > MARA Systems AB, Sweden -- Henrik Nordstrom <[EMAIL PROTECTED]> MARA Systems AB, Sweden