David B. Orwig wrote:

>Yes my list of projects is as scattered as the inner workings of my
>mind. I could relate to you how I got from my C-16 timing issues to my
>upcoming Ruby-German mining loco bash to boiler and pickling questions,
>but it could over flow your inbox.
>
>ANYHOW, I got one of those Chinese 7x12 lathes for Christmas. For my
>first actual project (after doing some test turning with some scrap
>steel and brass laying around) I decided to finish turning some AMS
>axles to retro fit ball bearings. What used to take my three days with a
>rickety cross slide vise and my drill press took me an afternoon
>(including setup!) with WAY more accurate results. (read this as 'Happy
>Camper')
>
>For my second project I'd like to attempt to build a clack valve to
>attach to the backhead fitting of my C-16. First I will need to learn
>how to use my lathe to cut threads (M5x0.5), that might take some time.
>
>The question is the clack valve body. Most of the stuff I've seen (full
>scale) is a type of swing valve or flap valve. I'm guessing I should be
>able to use a stainless ball and spring. Is this a good guess? Or do I
>need some type of plunger? Any suggestions? Anyone have drawings or
>plans I might be able to adapt?
>
>I'm not wanting to go into business, I'm just needing some actual
>project of something I plan to use so that I'm not just aimlessly making
>chips.
>
>
>Thanks,
>Dave Orwig
>Virginia Beach
>_______________________________________________
>SSLiveSteam mailing list
>Send messages: [email protected]
>Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
>Rules: http://www.45mm.com/sslivesteam_guide.html
>
>
>  
>
to Dave Orwig,
Whenever I need  metric outside thread I go to my friendly nut bolt guy 
and buy a metric bolt in brass or stainless. No thread turning at all. 
but that is just lazy me.
Dave Sykes       PFRR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://postfix.45mm.com/pipermail/sslivesteam/attachments/20070103/27248ba2/attachment.html
_______________________________________________
SSLiveSteam mailing list
Send messages: [email protected]
Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam
Rules: http://www.45mm.com/sslivesteam_guide.html

Reply via email to