Sulphur Springs Models sells nitrile balls in 1/8 and 5/32 inch diameters. The 5/32 diameter works just fine for Accucraft tender pumps.
See: http://www.sssmodels.com/ =============== Casey Sterbenz wrote: > Friends, > > Small Parts, Inc., has nitrile balls in small diameters and sells them > in lots of 10. Check out their catalog which is on line. You can > download the entire catalog in pdf format from their web site. The > specific URL for the nitrile balls is > http://www.smallparts.com/products/descriptions/bbn.cfm. If that > doesn't work just surf to http://www.smallparts.com and do a search > from that web page. The smallest size listed is 3/16" which > translates to just under 5mm, small enough for 1/4" scale use. > > LOTS of other model engineering supplies are available from this > site. I've purchased several items from them over the years, like > stainless steel hex bolts in model engineering sizes (0-80, 1-72, > 2-56, 4-40, 5-40, 6-32 and on and on and on . . . .), packs of 10, 25, > 100, in varying lengths, all at very reasonable prices. > > Usual disclaimers apply. > > Casey Sterbenz > O Scale Kings #8 > > >> From: Harry Wade <[EMAIL PROTECTED]> >> Reply-To: Small-scale live steam discussions >> <[email protected]> >> To: Small-scale live steam discussions <[email protected]> >> Subject: Re: [SSLiveSteam] New lathe - second project >> Date: Wed, 03 Jan 2007 13:23:55 -0600 >> >> At 02:05 PM 1/3/07 EST, you wrote: >> >That nitrile (spelling?) sounds interesting >> >> Some years ago many model engineers in the UK gravitated toward >> using >> nitrile rubber balls for check valves in an effort to reduce the leakage >> that always seemed to plague them. (It's plagued me.) Nitrile is >> similar >> in feel to the rubber used in O-rings and although they are "hard" >> rubber >> they have the ability to seal on at seat which has minute irregularities >> which might cause a SS ball to leak. This is the up-side. >> The downsides are that they wear and degrade and must be replaced >> much >> more often than metal balls, and they are much more expensive and aren't >> nearly as widely available as metal balls. I'm trying to fond a >> source for >> 3mm and 4mm nitrile balls right now and am having no luck . . . unless I >> want to order 10,000. >> >> Regards, >> Harry >> >> _______________________________________________ >> SSLiveSteam mailing list >> Send messages: [email protected] >> Cancel subscription: >> http://postfix.45mm.com/mailman/listinfo/sslivesteam >> Rules: http://www.45mm.com/sslivesteam_guide.html >> > > _________________________________________________________________ > Dave vs. Carl: The Insignificant Championship Series. Who will win? > http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://davevscarl.spaces.live.com/?icid=T001MSN38C07001 > > > >------------------------------------------------------------------------ > >_______________________________________________ >SSLiveSteam mailing list >Send messages: [email protected] >Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam >Rules: http://www.45mm.com/sslivesteam_guide.html > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://postfix.45mm.com/pipermail/sslivesteam/attachments/20070105/0b238199/attachment.html _______________________________________________ SSLiveSteam mailing list Send messages: [email protected] Cancel subscription: http://postfix.45mm.com/mailman/listinfo/sslivesteam Rules: http://www.45mm.com/sslivesteam_guide.html
