On 5/16/07, Zhong Wang <[EMAIL PROTECTED]> wrote:
Hi Louwtjie & Robert,
I'm afraid I don't quite get your questions here.
Are the hba connected to target directly in your configurations? It
would be very helpful to understand the situation if you provide more
information, i.e. topology, physical connection, storage information etc.
My comment follows Roberts concerning the first posters question:
"On 1/26/07 it was said that Leadville did not support Point to Point
on the QLogic 4gig HBA, and to force the HBA into Loop mode. Are there
any plans to support Point to Point, if so when."
The answer given was:
"Hi Doug,
There is an open bug on this issue:
http://bugs.opensolaris.org/view_bug.do?bug_id=6547693
It is something we are currently investigating.
I can't provide any dates at this point. You may want to keep an eye
on that bug.
David"
However, I'm confused since looking at a fcinfo output, I notice:
Manufacturer: QLogic Corp.
Model: QLE2462
Firmware Version: 4.0.27
FCode/BIOS Version: N/A
Type: N-port
State: online
N-port is a point device in a point-to-point fabric ... right ? This
being the leadville driver, how does the first question and bug relate
to each other?
Must the N_port be F_port ? (for a point device in a switched fabric)
Setup is:
V490, QLA2462, Brocade, 3510
I'm probably confused, stupid or both...
_______________________________________________
storage-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
