From a Linux box that is identical in hardware: # dmesg | grep MCP NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0 NFORCE-MCP55: chipset revision 161 NFORCE-MCP55: not 100% native mode: will probe irqs later NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
-- Dave On 02/06/2008 02:18 PM, Jason J. W. Williams wrote: > Which SATA chipset is on the motherboard? > > -J > > On Feb 6, 2008 2:15 PM, Dave <[EMAIL PROTECTED]> wrote: >> I've got a number of machines running nv_b81 and I'm getting messages >> like this: >> >> WARNING: /[EMAIL PROTECTED],0/pci10de,[EMAIL PROTECTED]/[EMAIL PROTECTED],0 >> (sd0): >> Error for Command: read(10) Error Level: Retryable >> Requested Block: 10089026 Error Block: 10089026 >> Vendor: ATA Serial Number: >> >> Sense Key: No_Additional_Sense >> ASC: 0x0 (no additional sense info), ASCQ: 0x0, FRU: 0x0 >> NOTICE: /[EMAIL PROTECTED],0/pci10de,[EMAIL PROTECTED]: >> port 0: device reset >> >> I'm unable to use the machines after I get the warning - they must be >> hard rebooted. I've tried disabling NCQ in /etc/system without success. >> This has happened in prior versions of Nevada as well. I usually get the >> message when first booting, but not always. >> >> All machines are running Dual Proc Opteron 2214, Tyan 2927G2NR >> motherboard, WD 500GB SATA drives. >> >> I'm at my wits end trying to find the solution. Any help is appreciated. >> >> Thanks >> -- >> Dave >> _______________________________________________ >> storage-discuss mailing list >> [email protected] >> http://mail.opensolaris.org/mailman/listinfo/storage-discuss >> _______________________________________________ storage-discuss mailing list [email protected] http://mail.opensolaris.org/mailman/listinfo/storage-discuss
