Hi,
In the latest Opensolaris build, the ahci(7D) is the only SATA driver
that supports the port multipliers. That means you can only use PMP with
a 100% AHCI-compatible SATA controllers (like Intel's
ICH9/ICH10/Ibexpeak, AMD SB700). On the PMP side, SI3726 (5-port) and
SI4726 (5-port) are on the list.
I think that you're probably using a SI3124 SATA controller which uses
the si3124(7D) SATA driver. The si3124 driver does not support PMP yet.
Regards,
Xiaoyu
On 05/25/2010 06:59 PM, Lord AhX wrote:
Hello,
I was hoping someone knew if PMP support in B125+ was removed. I am
successfully using SIL3124/SIL3726 in B122-B124 but anything higher I
get disconnected failed in cfgadm.
I also tried running cfgadm -x sata_reset_port and I get:
/ hardware driver ioctl/ failed
Thanks
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
_______________________________________________
storage-discuss mailing list
storage-discuss@opensolaris.org
http://mail.opensolaris.org/mailman/listinfo/storage-discuss
