Martin Gysel wrote:
Only used gas in the plan is the EAN27.
Subsurface dive plan
based on GFlow = 30 and GFhigh = 85
Transition to 40 m in 2:00 min - runtime 2:00 on EAN27
Stay at 40 m for 25:00 min - runtime 27:00 on EAN27
Switch gas to (24/24)
Transition to 37 m in 0:23 min - runtime 27:23 on (24/24)
it seems transition times are calculated by distance and speed, which
obviously is correct from a math point of view but for a diver, all
times should be rounded to at least half minutes. personally I even tend
to say lets round to minutes.
when diving deco on plan, the best thing is to have all stops in memory
(as a backup, or on a slate as a backup). but it gets really hard to
remember seconds or half minutes.
Agreed, it really makes sense to force these values to be in whole
minutes. At least that's what GUE Deco Planner and Multideco/VPlanner does.
it would also be nice if the planner output is in table form which
allows printing to take to depth
+1
Henrik
_______________________________________________
subsurface mailing list
[email protected]
http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface
