On 04 Jun 2014, at 2:01, Dirk Hohndel <[email protected]> wrote: > On Tue, Jun 03, 2014 at 06:31:42PM +0200, Joakim Bygdell wrote: >> Git latest master, (1f1dcecc02a5c33c81d41a8a7c6aa2b9cc6b6da5) >> Platform Mac. >> >> In Add Dive escape key has no function. >> Maybe it isn’t implemented as in the Planner that pressing the ESC key >> cancels the operation. > > This should work both in Add, Edit and Plan now. > >> Planner: >> 1# Unused gas mixes are not shown even if the option is set in preferences. > > Yes, I thought that was the consensus when we discussed this earlier. I no > longer copy unused cylinders. >
We did, yet something is not right. >> 2# Unused gas mixes are still used in the planned dive resulting in zero >> consumption issues and extra gas switch events. > > That sounds wrong. I don't see how this could be happening. > > Can you send step by step instructions how to reproduce this? Select dive with unused gases. Start Planner. In my case I had AIR as last active gas and a couple of mixes as unused gases. The planner then sets a gas switch at 15min. And I have al list of gases in the dive plan details that have zero consumption. Dirk, this is tested on the dive that I sent earlier. Another thing on master is that in Divelist the displayed gas is not the active gas. I will dig into this a bit more. > >> 3# Gas switch are set to closest subsequent stop depth instead of switch >> depth unless transitions are displayed. > > Robert fixed this. > > /D _______________________________________________ subsurface mailing list [email protected] http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface
