On Wed, Jun 4, 2014 at 8:18 AM, Dirk Hohndel <[email protected]> wrote:
> On Wed, Jun 04, 2014 at 07:45:18AM +0200, Joakim Bygdell wrote: > > >> Planner: > > >> 1# Unused gas mixes are not shown even if the option is set in > preferences. > > > > > > Yes, I thought that was the consensus when we discussed this earlier. > I no > > > longer copy unused cylinders. > > > > We did, yet something is not right. > > Correct. Because we did it wrong. Duh. > Should be fixed in the latest master. > Yupp, works as expected at least on Linux. > > > >> 2# Unused gas mixes are still used in the planned dive resulting in > zero consumption issues and extra gas switch events. > > > > > > That sounds wrong. I don't see how this could be happening. > > > > > > Can you send step by step instructions how to reproduce this? > > > > Select dive with unused gases. > > Start Planner. > > In my case I had AIR as last active gas and a couple of mixes as unused > gases. > > > > The planner then sets a gas switch at 15min. > > And I have al list of gases in the dive plan details that have zero > consumption. > > Dirk, this is tested on the dive that I sent earlier. > > Please try again. > > These issues does not show up on master. Probably because it where related to the issue above. > > Another thing on master is that in Divelist the displayed gas is not the > active gas. > > > > I will dig into this a bit more. > > Yes please - and try to explain it better as I'm not sure I understand > what you mean. > > /D > In the Dive list the O2% column does not show the correct value. The dive have AIR as active gas, two EAN mixes and one TX mix as unused. The values displayed in the O2% column shows the values from the TX mix, not the active gas. -- //Jocke
_______________________________________________ subsurface mailing list [email protected] http://lists.hohndel.org/cgi-bin/mailman/listinfo/subsurface
