Hello,
You can check some files as following:
/etc/inet/hosts
/etc/inet/netmasks
/etc/inet/networks
If any "SunRay" entry is in those files, ifconfig works automatically.
Or ... DHCP configuration ?
Regards,
Hajime Suzuci,
Thierry Delaitre wrote:
> i tried to remove the interface of the sunray interconnect and put it back
> and there are some interesting results:
>
> bash-3.00# /opt/SUNWut/sbin/utadm -d ce1
> ### Removing Sun Ray information for interface "ce1"
> Configuration for DHCP interface ce1 does not exist.
> ### Removing Sun Ray interface configuration for "ce1"
> LAN connections are on to allow Sun Ray connections from shared networks
> Do you want to turn off LAN connections? ([Y]/N): n
> bash-3.00# ifconfig -a
> lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
> index 1
> inet 127.0.0.1 netmask ff000000
> ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
> inet 161.74.91.26 netmask ffff0000 broadcast 161.74.255.255
> ether 0:3:ba:9b:47:dd
> ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
> inet 192.168.252.1 netmask ffffff00 broadcast 192.168.252.255
> bash-3.00# /opt/SUNWut/sbin/utadm -a ce1
> ### Configuring /etc/nsswitch.conf
> ### Configuring Service information for Sun Ray
> Error: unable to add vendor options to dhcp:
> Error: cannot add SunRay symbols to dhcptab:
> Could not create the Java virtual machine.
> Error: cannot add server macro "SunRay" to dhcptab:
> Could not create the Java virtual machine.
>
> The only thing i did was to apply the latest recommended patches for
> Solaris 10!
>
> BTW, is 3.1 being released soon ?
>
> Thierry.
>
> On Sat, 27 Aug 2005, Thierry Delaitre wrote:
>
>
>>I've got 2 sunray servers configured as a group. I'm sure i had configured
>>them as a group. however, the secondary server is now telling me that the
>>sunray interconnect framework (ce1) is not configured ! is this a bug ? Is
>>that because i've ran utadm -L on after or defined an ip alias on ce0 ?
>>
>>Thierry.
>>
>>bash-3.00# /opt/SUNWut/sbin/utadm -a ce1
>>Error: Interface "ce1" already configured; cannot add
>>
>>bash-3.00# /opt/SUNWut/sbin/utadm -l
>>LAN connections: On
>>Sun Ray interconnect framework is not configured
>>
>>bash-3.00# ifconfig -a
>>lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
>>index 1
>> inet 127.0.0.1 netmask ff000000
>>ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
>> inet 161.74.91.26 netmask ffff0000 broadcast 161.74.255.255
>> ether 0:3:ba:9b:47:dd
>>ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
>> inet 192.168.252.1 netmask ffffff00 broadcast 192.168.252.255
>>ce1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
>> inet 192.168.129.2 netmask ffffff00 broadcast 192.168.129.255
>> ether 0:3:ba:9b:47:dd
>
> _______________________________________________
> SunRay-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
