Yeah !!! Even i remove the old version SRSS 3.1 and install the new one SRSS 4.0 but the same thing.
Regards On Tue, Aug 26, 2008 at 11:34 AM, P.S.M. Swamiji <[EMAIL PROTECTED]> wrote: > Did you tried utconfig -u and then again reconfigure using utconfig?. > Pls note that utconfig -u completely removes the existing SRDS config. > If it's production system, pls wait for other opinions.. > > Thanks > P.S.M.Swamiji > > Note:These are my personal opinions, nothing to do with my employer > Habib Mohammedaman wrote: >> >> Dear All, >> >> I have come across a problem with the Sun Thin Client (Model: Sun Ray >> 2 Virtual Display Client) and request assistance from you urgently. >> >> The installation at the site is as follows: >> >> The Operating System Solaris 10 11/06 x86 runs on an HP Desktop (Intel >> processor) which also runs the Sun Ray3.1 application. I had recently >> changed the IP address (connected to a new vlan) of the Server that >> runs the Sun Ray application. After I tried to update the files and >> then reboot the Server, I noticed that it still held the old IP >> address. I then wrote a simple script and updated the /etc/rc3.d >> directory and the IP address was updated permanently. >> >> After checking the status on the Sun Ray Thin Client by connecting the >> Sun Ray Thin Client to the Server (running the Thin Client >> application), I noticed that it receives theIP address but fails to >> show the graphical interface and instead displayed the message 2D and >> 22D on the right hand lower side of the display on the Thin Client. >> >> On the Server running the Sun Ray application, i got the following message >> log: >> >> Couldn't bind to DS server >> Couldn't Connect to Ldap server . >> utjadmin.so or configuration error in /etc/opt/SUNWut/utadmin.conf >> ---- >> After receiving the above error, I replaced the Sun Ray 3.1 with the >> latest 4.0 version and after testing with the Sun Ray Thin Client, I >> received the same message but with additional information: >> >> During the the installation of Sun Ray 4.0, I received the following error >> : >> ---- >> Adding user admin ... >> Failed to add user(s) to the list >> ERROR: Could not retrieve policy. >> --- >> on the message log I received the same message >> --- >> Couldn't bind to DS server ID [70291] >> Couldn't Connect to Ldap server . >> utjadmin.so or configuration error in /etc/opt/SUNWut/utadmin.conf >> >> Under the circumstances, I request you to assist me, so that I am able >> to get the Graphic Interface on the Sun Ray Thin Client. >> >> With Kind Regards, >> >> Habib M. >> _______________________________________________ >> SunRay-Users mailing list >> [email protected] >> http://www.filibeto.org/mailman/listinfo/sunray-users >> > > _______________________________________________ > SunRay-Users mailing list > [email protected] > http://www.filibeto.org/mailman/listinfo/sunray-users > -- Habib M. _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
