ASSALAM-O-ALAIKUM
error codes 2D and 22D dont have to do anything with graphics, in fact from OSD
codes from 21, 22 explains that your sunray server is having a problem in
establishing connection with primary data store server (probably) which can be
because of altering IP address after installation. Error Code 26D describes
graphics choking. so what i think that if you are maintaining a failover group
then you have to unreplicate your all servers of fog then re run utreplica to
configure them as primary & secondary servers. Open up sunray admin GUI and
check network status of all servers which should be up.
btw dont try it directly on production servers, first test it on test bed coz
this is my personal opinion...
take care &
ALLAH Hafiz
> Date: Tue, 26 Aug 2008 11:11:21 +0300
> From: [EMAIL PROTECTED]
> To: [email protected]
> Subject: [SunRay-Users] Sun Ray Thin client not able to display Graphic
> Interface on Solaris
>
> Dear All,
>
> I have come across a problem with the Sun Thin Client (Model: Sun Ray
> 2 Virtual Display Client) and request assistance from you urgently.
>
> The installation at the site is as follows:
>
> The Operating System Solaris 10 11/06 x86 runs on an HP Desktop (Intel
> processor) which also runs the Sun Ray3.1 application. I had recently
> changed the IP address (connected to a new vlan) of the Server that
> runs the Sun Ray application. After I tried to update the files and
> then reboot the Server, I noticed that it still held the old IP
> address. I then wrote a simple script and updated the /etc/rc3.d
> directory and the IP address was updated permanently.
>
> After checking the status on the Sun Ray Thin Client by connecting the
> Sun Ray Thin Client to the Server (running the Thin Client
> application), I noticed that it receives theIP address but fails to
> show the graphical interface and instead displayed the message 2D and
> 22D on the right hand lower side of the display on the Thin Client.
>
> On the Server running the Sun Ray application, i got the following message
> log:
>
> Couldn't bind to DS server
> Couldn't Connect to Ldap server .
> utjadmin.so or configuration error in /etc/opt/SUNWut/utadmin.conf
> ----
> After receiving the above error, I replaced the Sun Ray 3.1 with the
> latest 4.0 version and after testing with the Sun Ray Thin Client, I
> received the same message but with additional information:
>
> During the the installation of Sun Ray 4.0, I received the following error :
> ----
> Adding user admin ...
> Failed to add user(s) to the list
> ERROR: Could not retrieve policy.
> ---
> on the message log I received the same message
> ---
> Couldn't bind to DS server ID [70291]
> Couldn't Connect to Ldap server .
> utjadmin.so or configuration error in /etc/opt/SUNWut/utadmin.conf
>
> Under the circumstances, I request you to assist me, so that I am able
> to get the Graphic Interface on the Sun Ray Thin Client.
>
> With Kind Regards,
>
> Habib M.
> _______________________________________________
> SunRay-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/sunray-users
_________________________________________________________________
Discover the new Windows Vista
http://search.msn.com/results.aspx?q=windows+vista&mkt=en-US&form=QBRE
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
