And, how are you supposed to upgrade to the newest v5.2.1? I tried to "utinstall" on my v5.2 but that did not work. There were error messages.
----- Forwarded Message ---- From: Kalle Anka <[email protected]> To: [email protected] Sent: Sat, June 25, 2011 6:49:29 PM Subject: Fw: SRS 5.2 Performance Regression Fixed I dont understand. I downloaded the SRS package anew and tried to update to newest version. I did as it says in the manual: "utsetup" but it did not work. There were some errors. So I backed to a fresh BE and reinstalled everything from scratch (gtar apache-tomcat etc etc etc). But now I can not upgrade the firmware. As Jenz Langner wrote: "after having installed that update I can report that the included firmware 4.3_146928-01_2011.06.03.14.41 indeed solves the slow screen update and stalling problem which was previously reported here. So everyone is suggested to update their firmwares to that one. best regards, jens" But I have the same old firmware: "4.3_50_2011.04.22.22.07", the firmware has not been upgraded to the version that Jenz talks about above: "4.3_146928-01_2011.06.03.14.41". What can be wrong? See below: # utrelease Sun Ray Software 5.2.1 # utfwsync Stopping Authentication Managers on frasse ... Will restart Authentication Managers in 5 seconds Restarting Authentication Managers ... # utfwadm -A -e 00144f946b02 Unit "00144F946B02" will be upgraded at its next power-on if it is served by host "frasse" and is connected to the network and is not already running firmware version "4.3_50_2011.04.22.22.07". ### stopped DHCP daemon ### started DHCP daemon ### reinitialized DHCP daemon # ./utquery 192.168.1.2 terminalID=00144f946b02 terminalIPA=192.168.1.2 model=SunRayP8 currentAuth=192.168.1.3 currentFW=4.3_50_2011.04.22.22.07 <------- this is old firmware! currentBarrier=430 currentBarrierLevel=430 currentMTU=1500 currentLease=56222 Subnet=255.255.255.0 Router=192.168.1.1 MTU=1500 LeaseTim=56278 DHCPServer=192.168.1.1 INFORMServer=192.168.1.3 AuthSrvr=192.168.1.3 AuthPort=7009 LogHost=192.168.1.3 FwSrvr=192.168.1.3 NewTVer=4.3_50_2011.04.22.22.07 FWservType=FWSrvr speed=100F parmsVersion=4.3_50_2011.04.22.22.07 parmsBarrier=430 configMTU=1500 AltAuth=192.168.1.3 dnsList=192.168.1.1 confEnabled=1 confNetType=DHCP conf.kbcountry=26 kbcountry=26 stopqon=0 bandwidth=100000000 cmdcachesize=512 _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
