"It looks like 5.2.1 includes patch 146928-01. Solaris 11 Express doesn't use the S10 and older patch system and therefore the Sun Ray installer can't install the patch. You can probably find the patch embedded in the 5.2.1 download and manually copy the files into place and/or run the bundled action scripts. I'll let someone else comment if they've actually tried installing 5.2.1 on S11e. William Yang" Ok, so does anyone has some pointers? How to do this on S11E? I am willing to experiment and post upgrade instructions here with some help from people.
----- Forwarded Message ---- From: Kalle Anka <[email protected]> To: [email protected] Sent: Sat, June 25, 2011 7:01:45 PM Subject: Fw: SRS 5.2 Performance Regression Fixed And, how are you supposed to upgrade to the newest v5.2.1? I tried to "utinstall" on my v5.2 but that did not work. There were error messages. ----- Forwarded Message ---- From: Kalle Anka <[email protected]> To: [email protected] Sent: Sat, June 25, 2011 6:49:29 PM Subject: Fw: SRS 5.2 Performance Regression Fixed I dont understand. I downloaded the SRS package anew and tried to update to newest version. I did as it says in the manual: "utsetup" but it did not work. There were some errors. So I backed to a fresh BE and reinstalled everything from scratch (gtar apache-tomcat etc etc etc). But now I can not upgrade the firmware. As Jenz Langner wrote: "after having installed that update I can report that the included firmware 4.3_146928-01_2011.06.03.14.41 indeed solves the slow screen update and stalling problem which was previously reported here. So everyone is suggested to update their firmwares to that one. best regards, jens" But I have the same old firmware: "4.3_50_2011.04.22.22.07", the firmware has not been upgraded to the version that Jenz talks about above: "4.3_146928-01_2011.06.03.14.41". What can be wrong? See below: # utrelease Sun Ray Software 5.2.1 # utfwsync Stopping Authentication Managers on frasse ... Will restart Authentication Managers in 5 seconds Restarting Authentication Managers ... # utfwadm -A -e 00144f946b02 Unit "00144F946B02" will be upgraded at its next power-on if it is served by host "frasse" and is connected to the network and is not already running firmware version "4.3_50_2011.04.22.22.07". ### stopped DHCP daemon ### started DHCP daemon ### reinitialized DHCP daemon # ./utquery 192.168.1.2 terminalID=00144f946b02 terminalIPA=192.168.1.2 model=SunRayP8 currentAuth=192.168.1.3 currentFW=4.3_50_2011.04.22.22.07 <------- this is old firmware! currentBarrier=430 currentBarrierLevel=430 currentMTU=1500 currentLease=56222 Subnet=255.255.255.0 Router=192.168.1.1 MTU=1500 LeaseTim=56278 DHCPServer=192.168.1.1 INFORMServer=192.168.1.3 AuthSrvr=192.168.1.3 AuthPort=7009 LogHost=192.168.1.3 FwSrvr=192.168.1.3 NewTVer=4.3_50_2011.04.22.22.07 FWservType=FWSrvr speed=100F parmsVersion=4.3_50_2011.04.22.22.07 parmsBarrier=430 configMTU=1500 AltAuth=192.168.1.3 dnsList=192.168.1.1 confEnabled=1 confNetType=DHCP conf.kbcountry=26 kbcountry=26 stopqon=0 bandwidth=100000000 cmdcachesize=512 _______________________________________________ SunRay-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/sunray-users
