Ok, I tried the command line you suggested, but I can not get it to work. It
will still use the old firmware as far as I can see:
# ./utfwadm -A -a -V -f ../lib/firmware
CoronaP1 4.3_50_2011.04.22.22.07
SunRayP10 4.3_50_2011.04.22.22.07
CoronaP2 4.3_50_2011.04.22.22.07
CoronaP3 4.3_50_2011.04.22.22.07
CoronaP4 4.3_50_2011.04.22.22.07
CoronaP5 4.3_50_2011.04.22.22.07
CoronaP6 4.3_50_2011.04.22.22.07
CoronaP7 4.3_50_2011.04.22.22.07
SunRayP8 4.3_50_2011.04.22.22.07
SunRayP9 4.3_50_2011.04.22.22.07
# ./utfwsync
Error: Could not get gstatus information from server frasse
utfwsync: fatal, unable to determine the trusted host group
# ./utfwadm -A -e 00144f946b02
Unit "00144F946B02" will be upgraded at its next power-on
if it is served by host "frasse" and is connected to
the network and is not already running firmware
version "4.3_50_2011.04.22.22.07".
### stopped DHCP daemon
### started DHCP daemon
### reinitialized DHCP daemon
----- Original Message ----
From: Bob Doolittle <[email protected]>
To: SunRay-Users mailing list <[email protected]>
Cc: Kalle Anka <[email protected]>
Sent: Sat, June 25, 2011 11:42:02 PM
Subject: Re: [SunRay-Users] Fw: SRS 5.2 Performance Regression Fixed
In this case it's easy, since the only update is new firmware.
So just unpack the install image, cd to the top, and (assuming you're just
using
.parms files) do:
/opt/SUNWut/sbin/utfwadm -A -a -V -f
Components/10-SRSS/Patches/solaris/sparc/146928-01/SUNWutfw/reloc/SUNWut/lib/firmware
If you have some more complex utadm configuration then you'll have to
extrapolate, but that's the path you want to the firmware.
Note the path specifies "sparc", but it's irrelevant in this case. The firmware
doesn't depend on the server architecture, and is therefore identical for all
platforms.
-Bob
On 06/25/11 03:36 PM, Kalle Anka wrote:
> "It looks like 5.2.1 includes patch 146928-01. Solaris 11 Express doesn't use
> the S10 and older patch system and therefore the Sun Ray installer can't
>install
> the patch. You can probably find the patch embedded in the 5.2.1 download and
> manually copy the files into place and/or run the bundled action scripts.
I'll
> let someone else comment if they've actually tried installing 5.2.1 on S11e.
> William Yang"
> Ok, so does anyone has some pointers? How to do this on S11E? I am willing to
> experiment and post upgrade instructions here with some help from people.
>
>
>
>
>
>
>
> ----- Forwarded Message ----
> From: Kalle Anka<[email protected]>
> To: [email protected]
> Sent: Sat, June 25, 2011 7:01:45 PM
> Subject: Fw: SRS 5.2 Performance Regression Fixed
>
> And, how are you supposed to upgrade to the newest v5.2.1? I tried to
> "utinstall" on my v5.2 but that did not work. There were error messages.
>
>
>
>
>
>
> ----- Forwarded Message ----
> From: Kalle Anka<[email protected]>
> To: [email protected]
> Sent: Sat, June 25, 2011 6:49:29 PM
> Subject: Fw: SRS 5.2 Performance Regression Fixed
>
> I dont understand. I downloaded the SRS package anew and tried to update to
> newest version. I did as it says in the manual: "utsetup" but it did not work.
> There were some errors. So I backed to a fresh BE and reinstalled everything
> from scratch (gtar apache-tomcat etc etc etc).
>
>
> But now I can not upgrade the firmware. As Jenz Langner wrote:
> "after having installed that update I can report that the included firmware
> 4.3_146928-01_2011.06.03.14.41 indeed solves the slow screen update and
>stalling
>
>
> problem which was previously reported here. So everyone is suggested to
update
> their firmwares to that one. best regards, jens"
>
> But I have the same old firmware: "4.3_50_2011.04.22.22.07", the firmware has
> not been upgraded to the version that Jenz talks about above:
> "4.3_146928-01_2011.06.03.14.41". What can be wrong? See below:
>
>
>
>
> # utrelease
> Sun Ray Software 5.2.1
>
>
>
>
> # utfwsync
> Stopping Authentication Managers on frasse ...
> Will restart Authentication Managers in 5 seconds
> Restarting Authentication Managers ...
>
>
>
>
> # utfwadm -A -e 00144f946b02
> Unit "00144F946B02" will be upgraded at its next power-on
> if it is served by host "frasse" and is connected to
> the network and is not already running firmware
> version "4.3_50_2011.04.22.22.07".
> ### stopped DHCP daemon
> ### started DHCP daemon
> ### reinitialized DHCP daemon
>
>
>
>
>
> # ./utquery 192.168.1.2
> terminalID=00144f946b02
> terminalIPA=192.168.1.2
> model=SunRayP8
> currentAuth=192.168.1.3
> currentFW=4.3_50_2011.04.22.22.07<------- this is old firmware!
> currentBarrier=430
> currentBarrierLevel=430
> currentMTU=1500
> currentLease=56222
> Subnet=255.255.255.0
> Router=192.168.1.1
> MTU=1500
> LeaseTim=56278
> DHCPServer=192.168.1.1
> INFORMServer=192.168.1.3
> AuthSrvr=192.168.1.3
> AuthPort=7009
> LogHost=192.168.1.3
> FwSrvr=192.168.1.3
> NewTVer=4.3_50_2011.04.22.22.07
> FWservType=FWSrvr
> speed=100F
> parmsVersion=4.3_50_2011.04.22.22.07
> parmsBarrier=430
> configMTU=1500
> AltAuth=192.168.1.3
> dnsList=192.168.1.1
> confEnabled=1
> confNetType=DHCP
> conf.kbcountry=26
> kbcountry=26
> stopqon=0
> bandwidth=100000000
> cmdcachesize=512
> _______________________________________________
> SunRay-Users mailing list
> [email protected]
> http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
