It's not a fresh install of 5.2.1 because it can't add the patch that
makes it 5.2.1.
On 6/25/11 4:58 PM, Kalle Anka wrote:
"Where id you run that command from? /opt/SUNWut/sbin? Note Bob's full path,
that's the path of the new firmware."
I did the below on a fresh BE, it is a new fresh install of SunRay Server
v5.2.1:
# /opt/SUNWut/sbin/utfwadm -A -a -V -f /opt/SUNWut/lib/firmware/
CoronaP1 4.3_50_2011.04.22.22.07
SunRayP10 4.3_50_2011.04.22.22.07
CoronaP2 4.3_50_2011.04.22.22.07
CoronaP3 4.3_50_2011.04.22.22.07
CoronaP4 4.3_50_2011.04.22.22.07
CoronaP5 4.3_50_2011.04.22.22.07
CoronaP6 4.3_50_2011.04.22.22.07
CoronaP7 4.3_50_2011.04.22.22.07
SunRayP8 4.3_50_2011.04.22.22.07
SunRayP9 4.3_50_2011.04.22.22.07
# ls /opt/SUNWut/lib/firmware
CoronaP1 CoronaP2 CoronaP4 CoronaP6 CoronaP8 SunRay.disableGUI
CoronaP10 CoronaP3 CoronaP5 CoronaP7 CoronaP9 SunRay.enableGUI
# ls /opt/
apache-tomcat apache-tomcat-5.5.20 DTT install-test SUNWkio SUNWut
SUNWutref SUNWuttsc
# /opt/SUNWut/sbin/utquery 192.168.1.2
terminalID=00144f946b02
terminalIPA=192.168.1.2
model=SunRayP8
currentAuth=192.168.1.3
currentFW=4.3_50_2011.04.22.22.07
...
# /opt/SUNWut/sbin/utrelease
Sun Ray Software 5.2.1
----- Original Message ----
From: Bob Doolittle<[email protected]>
To: SunRay-Users mailing list<[email protected]>
Cc: Kalle Anka<[email protected]>
Sent: Sat, June 25, 2011 11:42:02 PM
Subject: Re: [SunRay-Users] Fw: SRS 5.2 Performance Regression Fixed
In this case it's easy, since the only update is new firmware.
So just unpack the install image, cd to the top, and (assuming you're just using
.parms files) do:
/opt/SUNWut/sbin/utfwadm -A -a -V -f
Components/10-SRSS/Patches/solaris/sparc/146928-01/SUNWutfw/reloc/SUNWut/lib/firmware
If you have some more complex utadm configuration then you'll have to
extrapolate, but that's the path you want to the firmware.
Note the path specifies "sparc", but it's irrelevant in this case. The firmware
doesn't depend on the server architecture, and is therefore identical for all
platforms.
-Bob
On 06/25/11 03:36 PM, Kalle Anka wrote:
"It looks like 5.2.1 includes patch 146928-01. Solaris 11 Express doesn't use
the S10 and older patch system and therefore the Sun Ray installer can't
install
the patch. You can probably find the patch embedded in the 5.2.1 download and
manually copy the files into place and/or run the bundled action scripts.
I'll
let someone else comment if they've actually tried installing 5.2.1 on S11e.
William Yang"
Ok, so does anyone has some pointers? How to do this on S11E? I am willing to
experiment and post upgrade instructions here with some help from people.
----- Forwarded Message ----
From: Kalle Anka<[email protected]>
To: [email protected]
Sent: Sat, June 25, 2011 7:01:45 PM
Subject: Fw: SRS 5.2 Performance Regression Fixed
And, how are you supposed to upgrade to the newest v5.2.1? I tried to
"utinstall" on my v5.2 but that did not work. There were error messages.
----- Forwarded Message ----
From: Kalle Anka<[email protected]>
To: [email protected]
Sent: Sat, June 25, 2011 6:49:29 PM
Subject: Fw: SRS 5.2 Performance Regression Fixed
I dont understand. I downloaded the SRS package anew and tried to update to
newest version. I did as it says in the manual: "utsetup" but it did not work.
There were some errors. So I backed to a fresh BE and reinstalled everything
from scratch (gtar apache-tomcat etc etc etc).
But now I can not upgrade the firmware. As Jenz Langner wrote:
"after having installed that update I can report that the included firmware
4.3_146928-01_2011.06.03.14.41 indeed solves the slow screen update and
stalling
problem which was previously reported here. So everyone is suggested to
update
their firmwares to that one. best regards, jens"
But I have the same old firmware: "4.3_50_2011.04.22.22.07", the firmware has
not been upgraded to the version that Jenz talks about above:
"4.3_146928-01_2011.06.03.14.41". What can be wrong? See below:
# utrelease
Sun Ray Software 5.2.1
# utfwsync
Stopping Authentication Managers on frasse ...
Will restart Authentication Managers in 5 seconds
Restarting Authentication Managers ...
# utfwadm -A -e 00144f946b02
Unit "00144F946B02" will be upgraded at its next power-on
if it is served by host "frasse" and is connected to
the network and is not already running firmware
version "4.3_50_2011.04.22.22.07".
### stopped DHCP daemon
### started DHCP daemon
### reinitialized DHCP daemon
# ./utquery 192.168.1.2
terminalID=00144f946b02
terminalIPA=192.168.1.2
model=SunRayP8
currentAuth=192.168.1.3
currentFW=4.3_50_2011.04.22.22.07<------- this is old firmware!
currentBarrier=430
currentBarrierLevel=430
currentMTU=1500
currentLease=56222
Subnet=255.255.255.0
Router=192.168.1.1
MTU=1500
LeaseTim=56278
DHCPServer=192.168.1.1
INFORMServer=192.168.1.3
AuthSrvr=192.168.1.3
AuthPort=7009
LogHost=192.168.1.3
FwSrvr=192.168.1.3
NewTVer=4.3_50_2011.04.22.22.07
FWservType=FWSrvr
speed=100F
parmsVersion=4.3_50_2011.04.22.22.07
parmsBarrier=430
configMTU=1500
AltAuth=192.168.1.3
dnsList=192.168.1.1
confEnabled=1
confNetType=DHCP
conf.kbcountry=26
kbcountry=26
stopqon=0
bandwidth=100000000
cmdcachesize=512
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
_______________________________________________
SunRay-Users mailing list
[email protected]
http://www.filibeto.org/mailman/listinfo/sunray-users
