On Saturday, April 5, 2003, at 02:17 PM, Alan Kim wrote: > If the ATP-860 and he 120GXP is new to your computer, you'll have to > make > sure the ATP-860 card is compatible with your system and that it's > installed > and functioning properly first.
... and then you may have to configure the drive for Slave or Master, as appropriate (or Single if it's the only drive on the card). This is especially true if the computer sees the card but then the card can't see the drive, preventing Drive Setup from seeing it too. Many drives come today set up for Cable-Select which makes the controller sort out what devices are where. This may not work for you, however. -David -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
