On Saturday, April 5, 2003, at 02:17 PM, Alan Kim wrote: > > > William Smith wrote: > >> >> Utilities set-up formats the HD in to sectors etc.? >> >> Have an IBM Deskstar 120GXP and the ATA card IDE >> processor ATP-860 can't find it. > > ------- > > Assuming the 120GXP is an extra drive you installed and the computer is > running off another drive; > > You should be able to acquire and format/partition the drive with Apple > Drive Setup. > > If the ATP-860 and he 120GXP is new to your computer, you'll have to > make > sure the ATP-860 card is compatible with your system and that it's > installed > and functioning properly first. > > Hope this gets you started. > > Alan
Also, check that cable (if you can attach to another drive) and make sure the jumper settings are correct..Single , Master or Slave if they apply. Phillip -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
