Hello everyone Someone wrote to me off-list and asked about the dip switch settings on the ZIF carrier card. I thought I would post my reply here as well:
Use the dip switch settings for the zif as suggested by the instructions that came with the Powerlogix zif if you were going to install the zif into a BEIGE G3. The zif carrier card should be set for a 50 mhz bus and I used a 12x multiplier setting.(or faster depending on how stable your system is at higher bus speeds-OVERCLOCK AT YOUR OWN RISK! I DESTROYED a processor and zif carrier card about 3 years ago overclocking.) The settings for a 50 mhz bus/12x multiplier are in your XLR8 zif carrier manual and I believe they are: ON: 1,2,4,6,7,8,9,10,12 OFF: 3,5,11 You might want to double check those before using them. My S900 bus speed is rock solid at 55 mhz and I don't feel the need to try to go any higher. I have been told that the muliplier settings don't really matter as the zif multiplier is controlled by the CPU Director software from Powerlogix. Good luck. George __________________________________ Do you Yahoo!? Find out what made the Top Yahoo! Searches of 2003 http://search.yahoo.com/top2003 -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
