From: BigMomma <[EMAIL PROTECTED]> Date: Tue, 14 Sep 2004 10:38:00 -0400
Hi.
Thanks to all whom replied to my earlier post. I have the jumpers 1,2,4,6,7,8 set to on. Maybe they should be set differently. Would anyone know the proper settings or at least ones that might work? The clip seems to be holding things in place pretty tight.
Thanks Again
Jacqueline
It would seem to be the correct setting for what should be a very safe 50 MHz bus speed for your 300 MHz Zif. What is missing is you don't mention what you are using for the CPU Multiplier setting. These are jumpers 9,10,11,12 the correct setting for 300 Mhz would be 10 on the rest off. A wrong setting could have the Zif running as fast as 600 MHz! Hope this helps , Will S
-- SuperMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
