on 9/14/04 2:30 PM, BigMomma at [EMAIL PROTECTED] wrote: > Hi. > The jumpers on the Zif card only go up to 10 and there are no jumpers > on the processor card like on my 500 one. Also the carrier card the 500 > G3 is on the jumpers go up to 12. On the carrier card on one area it > reads "XLR27 R1.1 then Copyright 1998-2000 XLR8 2000". I bought it from > someone on this great list but I can't remember who. They had it in an > S900 but moved up to a Sonnet. If I try different jumper settings will > it damage the computer? > Thanks Again. > Jacqueline ~~~~~~~~~~~~~~~~~~~~~~~~~~
No. You just can't go a setting that exceeds the bus speed of the machine. Some jumpers set bus speed, some set a multiplier ratio. So if you set the bus speed at the machine speed, say 50 or 66 mhz., then you set the ratio to 8-to-one, your XLR8 CPU will run at 400 or 568mhz. IF it'll go that fast. Jeff G -- SuperMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | Service & Replacement Parts [EMAIL PROTECTED] | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> SuperMacs list info: <http://lowendmac.com/supermacs/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/supermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
