Andrey Filippov:
Michael, most likely (but I'm not 100% positive) the FPGA code does not
need any changes, just the software. And unfortunately we do not have
sufficient resources to do that job. I can only offer some help by
answering particular questions related to that code, not to do the
actual coding.
back to that question. I currently have a 353 camera (from Sebastian), a
fully working development setup and latest firmware from CVS.
I notice "PF_HEIGHT" ist still part of the settings (in parsedit.php)
and - at least - comments of the FPGA source indicate the photofinish
stuff is still in there.
still I wonder how I could put this pieces together?
as far as I think, the driver (what actually is the driver in terms of
source code/files?) should handle that information (PF_HEIGHT) to the
fpa and programm FPGA ans sensor into linescan-mode. Then fpga aquires
image in linescanmode and delivers it back to the chain/buffers as
normally (if not architecture changes described here[*] make more
changes necessary). so how would I do that?
or am I completely wrong here?
any hints appreciated
best,
m,-
[*]
http://www.linuxfordevices.com/c/a/Linux-For-Devices-Articles/Elphel-camera-under-the-hood-from-Verilog-to-PHP/
_______________________________________________
Support-list mailing list
[email protected]
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
