Am Mi, den 07.07.2004 schrieb Paul um 18:25: > Router Config > You need to set the router to foward port 11354 to the ip address of > your redhat machine. That is the DMZ setting. If your router just > makes one comptuer the dmz then set your redhat machine as the dmz. > Error > Is another copy of freenet running? 'ps -A|grep java' will have a > progam called 'javaw' running if freenet (or another java app) is > running. You can always change the port that it should bind too. You > should have privliges to bind to that port. > ~Paul
OK ! So is will work on this after my holiday, but i have some questions before SO it is better to get a dyndns account and i got that, but now as always on linux i got really sidetracked. So i have an account and the ddclient, of course setting up ddclient seems to be another complicated task ..router settings etc.... Is it ok if i ask for help on that list here, or is it OFF-Topic ? I always have the same problem: How can i test at which point the connection is not working.. Here with ddclient, how do i find the error.. so here is my ddclient.conf ###################################################################### ## ## Define default global variables with lines like: ## var=value [, var=value]* ## These values will be used for each following host unless overridden ## with a local variable definition. ## ## Define local variables for one or more hosts with: ## var=value [, var=value]* host.and.domain[,host2.and.domain...] ## ## Lines can be continued on the following line by ending the line ## with a \ ## ###################################################################### daemon=300 # check every 300 seconds syslog=yes # log update msgs to syslog mail=root # mail all msgs to root mail-failure=root # mail failed update msgs to root pid=/var/run/ddclient.pid # record PID in file. # #use=watchguard-soho, fw=192.168.111.1:80 # via Watchguard's SOHO FW #use=netopia-r910, fw=192.168.111.1:80 # via Netopia R910 FW #use=smc-barricade, fw=192.168.123.254:80 # via SMC's Barricade FW #use=netgear-rt3xx, fw=192.168.0.1:80 # via Netgear's internet FW #use=linksys, fw=192.168.1.1:80 # via Linksys's internet FW #use=maxgate-ugate3x00, fw=192.168.0.1:80 # via MaxGate's UGATE-3x00 FW #use=elsa-lancom-dsl10, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router #use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router #use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80 # via ELSA LanCom DSL/10 DSL Router #use=alcatel-stp, fw=10.0.0.138:80 # via Alcatel Speed Touch Pro #use=xsense-aero, fw=192.168.1.1:80 # via Xsense Aero Router #use=allnet-1298, fw=192.168.1.1:80 # via AllNet 1298 DSL Router #use=3com-oc-remote812, fw=192.168.0.254:80 # via 3com OfficeConnect Remote 812 #use=e-tech, fw=192.168.1.1:80 # via E-tech Router #use=cayman-3220h, fw=192.168.0.1:1080 # via Cayman 3220-H DSL Router # fw=192.168.2.1 fw-login=nurense fw-password=carlito # FW login and password # ## To obtain an IP address from FW status page (using fw-login, fw-password) use=fw, fw=192.168.2.1/status_main.htm, fw-skip='IP Address' # found after IP Address # ## To obtain an IP address from Web status page (using the proxy if defined) #use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address # #use=ip, ip=127.0.0.1 # via static IP's #use=if, if=eth0 # via interfaces #use=web # via web # #protocol=dyndns2 # default protocol #proxy=fasthttp.sympatico.ca:80 # default proxy #server=members.dyndns.org # default server #server=members.dyndns.org:8245 # default server (bypassing proxies) #login=your-login # default login #password=test # default password #mx=mx.for.your.host # default MX #backupmx=yes|no # host is primary MX? #wildcard=yes|no # add wildcard CNAME? ## ## dyndns.org dynamic addresses ## ## (supports variables: wildcard,mx,backupmx) ## # server=members.dyndns.org, \ # protocol=dyndns2 \ # your-dynamic-host.dyndns.org ## ## dyndns.org static addresses ## ## (supports variables: wildcard,mx,backupmx) ## # static=yes, \ # server=members.dyndns.org, \ # protocol=dyndns2 \ # your-static-host.dyndns.org ## ## ## dyndns.org custom addresses ## ## (supports variables: wildcard,mx,backupmx) ## # custom=yes, \ # server=members.dyndns.org, \ # protocol=dyndns2 \ # your-domain.top-level,your-other-domain.top-level ## ## ZoneEdit (zoneedit.com) ## # server=www.zoneedit.com, \ # protocol=zoneedit1, \ # login=your-zoneedit-login, \ # password=your-zoneedit-password \ # your.any.domain,your-2nd.any.dom ## ## EasyDNS (easydns.com) ## # server=members.easydns.com, \ # protocol=easydns, \ # login=your-easydns-login, \ # password=your-easydns-password \ # your.any.domain,your-2nd.any.domain ## ## Hammernode (hn.org) dynamic addresses ## # server=dup.hn.org, \ # protocol=hammernode1, \ # login=your-hn-login, \ # password=your-hn-password \ # your-hn-host.hn.org,your-2nd-hn-host.hn.org ## ## dslreports.com dynamic-host monitoring ## # server=members.dslreports.com \ # protocol=dslreports1, \ # login=dslreports-login, \ # password=dslreports-password \ # dslreports-unique-id ## ## OrgDNS.org account-configuration ## use=web, web=members.orgdns.org/nic/ip server=www.orgdns.org \ protocol=dyndns2 \ login=soundgigi \ password=carlito \ soundgigi.orgdns.org ## ## dnspark.com ## (supports variables: mx, mxpri) ## # use=web, web=ipdetect.dnspark.com, web-skip='Current Address:' # protocol=dnspark, \ # server=www.dnspark.com, \ # your-host.dnspark.com Did i miss something fundamental ? Just to understand.... the ddclient connects automatically to dyndns, so it extracts the current ip-adress from the router ant that is linked to my domain..which is soundgigi.dyndns.org so i should be able to ping that domain name if the connection works, right ?? So and after that i set my IP in the freenet.config to soundgigi.dyndns.org, right ? OK Thats it for now I appreciate your help very much !! Bye Luigi _______________________________________________ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]
