RE: [pfSense Support] filtered bridge

[Gary Buckmaster]

Alan,   You want to create outbound allow rules for the NIC facing the particular machines in question.  Assuming OPT1 is your internet-facing NIC and you want a machine on the network segment serviced by OPT2 to be able to make outbound connections, your allow rule will need to be applied to OPT2.  Always remember to create the rules for the NIC that will see the traffic first.    Cheers,   Gary -----Original Message----- From: alan walters [mailto:[EMAIL PROTECTED] Sent: Monday, September 05, 2005 6:15 PM To: support@pfsense.com Subject: [pfSense Support] filtered bridge I havea query about filtered bridges.   I have opt2 bridged to opt1  I have rules on opt1 to all certain IP addresses to access the internet Ie if interface opt1 allow 192.168.1.100 to all   I have 1 ip address on opt2 that I want to allow onto opt1 and access the internet What rules should work?   I have tried   Ie if interface opt2 allow 192.168.1.200 to all   But this does not seem to work I cannot ping opt gateway     Any ideas on the ruleset suggested for this to work well??