If you use squid - get a hard drive. Squid will accelerate the death of the CF card from 5/10 years to probably less than one.
-----Original Message----- From: Jeremy Bennett [mailto:[EMAIL PROTECTED] Sent: Friday, 1 December 2006 3:24 p.m. To: [email protected] Subject: Re: [pfSense Support] Smallest drive for PFsense What if I wanted to use the installer of the liveCD with package support? What size would be optimal? The only package I'm likely to install would be the squid proxy Thank you, jbennett On Nov 30, 2006, at 4:07 PM, Holger Bauer wrote: > Your cf media needs at least 128 mb. You can run the embedded image > from > that, however you will not have package support then. Packages are > only > supported on full installs. Also note that the console output is at > serial console and you need a serial nullmodem cable to assign > interfaces the first time you boot it up for the embedded image. > > Holger > > -----Original Message----- > From: Jeremy Bennett [mailto:[EMAIL PROTECTED] > Sent: Friday, December 01, 2006 3:03 AM > To: [email protected] > Subject: [pfSense Support] Smallest drive for PFsense > > How much space will PFsense install in? I'd like to install it on a CF > card on a full size PC (not WRAP) and am curious what size card I > can/should use (or if it is even a good idea). > > Thank you, > jbennett > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
