Hi PFSENSE support, First of all, i would like to introduce myself, my name is Eng, i am working for a charity hospital in Malaysia name "Adventist hospital" as IT network enginner, thanks for your information sharing on the forum, your valuable information is appreciated, it is a good forum with good resource on this website that people make a reference and raise an question, by writing a letter, i would like to get some advice from you about my PFsense server setup, now, i am setting up a PFsense firewall for load balancer purpose and fail over function for our hospital, i found this installation guide ,http://pfsense.iserv.nl/tutorials/outgoing_loadbalancing/outgoing_loadbalancing.pdf) and other configuration guide from Internet, however, it seem to be not working so, i have been reconfiguring over and over in so many time , but it is still the same problem. below is my spec for your perusal,
1) Pfsense server with 3 NIC ( LAN, WAN and OPT1) 2) 2 ISP Internet WAN line in SDSL with static IP 3) WAN=static IP, OPT1=static IP and LAN=static IP 4) IP WAN= 219.94.36.34, DNS= 202.188.1.5/202.188.0.133 5) IP OPT1= 61.4.110.200 6) IP LAN= 192.168.1.1 My intention is to build a redundacy approach for our hospital service improvement for load balancing in Internet connection as well as fail over function in the event of one of those line is unavailable, please advice with a configuration guide how to configure the POOL, NAT and rule, thank you very much in advance. From: CE Ang Penang adventist hospital IT network Engineer
