Hi Holger Bauer, Thanks for your advice and information, currently, my PFSENSE version is BETA 4, was it what you mean to get the newer snapshots and upgarde from my existing PFSENSE firewall or get the ISO from the same URL and reinstall it? if it is upgarde, may i know how do you do that, please advice.
Thank you. From: CE Ang --- Holger Bauer <[EMAIL PROTECTED]> wrote: > Please don't use this document for setting it up. > It's outdated. I > recommend getting one of the newer snapshots from > http://snapshots.pfsense.com/FreeBSD6/RELENG_1/ as > they have a new > mechanism of pool creation that should be much > easier. > > It comes down to basically just setup the pool(s) > and utilize them as > gateway in your firewallrules settings. > > Advanced outbound NAT is only needed if you add a > CARP cluster to it or > work with multiple virtual Ips. > > Holger > > > ________________________________ > > From: AngChorEng [mailto:[EMAIL PROTECTED] > Sent: Wednesday, January 24, 2007 7:24 AM > To: [email protected] > Subject: [pfSense Support] Pfsense load balancer > and fail over > for outgoing traffic > > > Hi PFSENSE support, > > First of all, i would like to introduce myself, my > name is Eng, > i am working for a charity hospital in Malaysia name > "Adventist > hospital" as IT network enginner, thanks for your > information sharing on > the forum, your valuable information is appreciated, > it is a good forum > with good resource on this website that people make > a reference and > raise an question, by writing a letter, i would like > to get some advice > from you about my PFsense server setup, now, i am > setting up a PFsense > firewall for load balancer purpose and fail over > function for our > hospital, i found this installation guide > ,http://pfsense.iserv.nl/tutorials/outgoing_loadbalancing/outgoing_loadb > alancing.pdf) and other configuration guide from > Internet, however, it > seem to be not working so, i have been reconfiguring > over and over in so > many time , but it is still the same problem. below > is my spec for your > perusal, > > 1) Pfsense server with 3 NIC ( LAN, WAN and OPT1) > 2) 2 ISP Internet WAN line in SDSL with static IP > 3) WAN=static IP, OPT1=static IP and LAN=static IP > 4) IP WAN= 219.94.36.34, DNS= > 202.188.1.5/202.188.0.133 > 5) IP OPT1= 61.4.110.200 > 6) IP LAN= 192.168.1.1 > > My intention is to build a redundacy approach for > our hospital > service improvement for load balancing in Internet > connection as well > as fail over function in the event of one of those > line is unavailable, > please advice with a configuration guide how to > configure the POOL, NAT > and rule, thank you very much in advance. > > > > From: > > CE Ang > Penang adventist hospital > IT network Engineer > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: > [EMAIL PROTECTED] > For additional commands, e-mail: > [EMAIL PROTECTED] > > >
