On Sat, 17 Apr 1999 00:00:12 +0000, Automatic digest processor wrote:
> Date:    Fri, 16 Apr 1999 10:37:39 -0400
> From:    Vrondi <[EMAIL PROTECTED]>
> Subject: Re: best e-mail program

> Hello all,
> I have a 386 sitting around, and Windows 3.11 _crawls_ on it.  So
> I've DOS on there. 4 meg of RAM.
> So, My Father wants me to set up this little old computer in his
> office so he can get his e-mail.
> So, what is the best DOS e-mail program for a beginner.  I've set
> up several different ones and played with them, but for my father, if
> it's simple, it'll be better.
> So, suggestions everyone?  Easiest POP3/SMTP e-mail program for
> the end user to use once it's set up?

> Date:    Fri, 16 Apr 1999 21:55:25 +0000
> From:    Or Botton <[EMAIL PROTECTED]>
> Subject: Re: best e-mail program
> I'll try to use Arachne, though it might be abit too slow if
> installed on anything less then a 386.

> Date:    Fri, 16 Apr 1999 20:08:49 GMT
> From:    Steven Darnold <[EMAIL PROTECTED]>
> Subject: best e-mail program
> For the BEST email, you should think Linux.
> And yes, Linux will run on that machine (as long as you put some
> swap on your HDD).  Of course, you won't be able to use X, but
> you don't need it for email.  Most distributions (with the notable
> exception of RedHat) enable you to do a compact installation
> (including email) that will run on your 386.  You'll find that
> console Linux runs MUCH faster than Windows 3.11.

If your Father is keyboard oriented the LINUX solution (probably with
PINE) or PCPINE on DOS is very good.  If he is mouse oriented, then the
ARACHNE solution is better.

I would suggest more RAM in either case, if possible, and definitely the
fastest modem you can install on his serial ports.

For Arachne, set it up to go directly to MAIL.HTM, and be aware that if
you reply to an Email address, that you can add that address to the
HOTLIST.HTM with the proper icon in the tool bar, and so use the Hotlist
for an address book, and you can install an external editor that allows
cut and paste between files or messages as well as having a right button
edit menu.  You will need to get the add-on (APM) package from the
Arachne home site:

           http://home.arachne.cz/

Also cleanup the autoexec.bat and config.sys to get rid of
any extra drivers and/or TSRs. AND DELTREE WINDOWS, IT WILL MAKE YOU
FEEL SO GOOD!

Make sure he has an analog phone line in his office to connect the modem
to.  Many office buildings use an internal digital telephone system
which will not work and may (probably will) damage the modem.

I am assuming the 386 will be a stand alone Email box.  If this is
connecting to a LAN, he should have the LAN administrator help him
with his setup which may determine what Email package he is forced
to use.  The LAN administrator has both a right and a responsibility
to know what is connected to and running on the LAN.

There are lots of other choices for both DOS and the LINUX console, but
these two are as good as any.  Since you already have DOS, I would give
the nod to Arachne.  BTW if he tries to browse the WWW, with that
machine, he might be disappointed, but for Email, it should be superb
even at 4 MEGs RAM.

End
Peace
Dale Hoogeveen    Email:  [EMAIL PROTECTED]
              Home site:  http://www.net-info.com/~dutch

To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with 
unsubscribe SURVPC in the body of the message.
Also, trim this footer from any quoted replies.

Reply via email to