At 07:49 PM 2/7/00 -0500, you wrote:
>Dunno why I hadn't thought of this. It wouldn't be done that directly,
>but if you or a friend can construct a simple circuit from breadboard
>and components, I can draw a schematic for it. Should be pretty
>inexpensive to build. Email a request and specify TXT, PKM(Grafx2), PCX,
>BMP, or GIF(shhh!). The TXT version may be a little harder to
>understand, as I'm anything but an ASCII artist.
Why need this? Why not simply splice the wires that would come from the
power supply into the appropriate sorts of wires on the car?
I do not know how to construct a circuit, nor have I such a friend, but
heck, the wires coming out of the power supply supply standard voltages
that a car supplies out of its fusebox to travel to all the different bulbs
and such.
> > Just clip the connectors off an old busted power supply, splice them onto
> > the right wires and then splice those into the
>
> >car's system
>(to be read _power supply_, instead)
no, not to be read that! I mean, off the fuse box sitting behind the dash!
anyway, I'm expressing my imagination, but I've not bothered to research
the precise needs of the board vs the car, still, I remember studying the
voltages into the computer components and that they were the self same
voltages that the car's fusebox delivers out.
>Yep. And if you don't have an old supply lying around for this, Radio
>Shack has the connectors if you know what you're looking for.
They don't here. The stores in this city in the malls are reduced
versions carrying a limited supply of the tech stuff,
unfortunately. Mostly carry gadgets and electronics, few parts. More
likely to find them at Canadian Tire, really. No matter, I can find them
when I'm ready.
To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
unsubscribe SURVPC in the body of the message.
Also, trim this footer from any quoted replies.
More info can be found at;
http://www.softcon.com/archives/SURVPC.html
