On Fri, Mar 17, 2000 at 08:45:36AM +0000, Edenyard wrote:
> To answer the questions in reverse order: To set an
> S-register to a value, simply put Sn=xxx in an AT type command
> to the modem, where 'n' is the number of the S-register and
> 'xxx' is the value to which it should be set. That was the easy
> bit! As for what the S-registers are, well - they are just a
> number of different parameters that can be set up inside the
> modem to control different things. There are lots of them,
> depending on the exact type of modem, and the best place to look
> for an accurate list is in your modem's manual.
Some modems (my Sportster for one) will also display info
about the S-registers in response to an "ats$" command.
R.
>
> Ron.
To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
unsubscribe SURVPC in the body of the message.
Also, trim this footer from any quoted replies.
More info can be found at;
http://www.softcon.com/archives/SURVPC.html
