Jerry,
If I remember correctly Chrys, that left the list a few monthes back,
has one. Maybe you could get a hold of her.
Chad Fernandez
Michigan, USA
"Jerry J. Haumberger" wrote:
>
> Hello folks!
>
> Last week I was given a TRS-80, Model 100, complete with an additional
> external floppy disk drive (Tandy, Model 2). It has come with an
> original Tandy carrying case and a copy of the software utility that
> should operate the external fdd. The system functions properly, as
> far as I could determine after a few days of experimenting -- except
> that I had to order (from Tandy -- yes! -- there's even an 800 number
> for stuff this old) a data cable for the ext. fdd, which was missing.
> I have the manual for the floppy drive, but I won't be certain whether
> or not I'll be able to install the floppy drive software (via a BASIC
> program that you set up within the TRS-80) until I get that data cable
> from Tandy. And, by the way, I've retrieved from the Internet exact
> duplicates of the rest of the original manuals, and these have all the
> information about the built-in software, hardware, etc..
>
> First of all, does anyone on the SURVPC list own one of these machines?
> It would be interesting to compare what we've got. (Of course, there's
> many other places to discuss these machines, but I wanted to start here.)
>
> Secondly, I've got the parallel cable for connecting to a printer,
> but my Okidata 9-dot matrix printer will only print one line at a time,
> after which it overwrites continuously on the same line. How do I get
> it to recognize an automatic CR (carriage return)?
>
> And, finally, does anyone have any experience with the use of its
> built-in modem, or with running it with an external modem?
>
> Thanks!
>
> Jerry [o:--] "The" IBM AT/5170 model 339 [--^~---] 9600kbps/30M HD
> *1986 ||||||||||||||||||||||||||||||||||||| [ =====_] 512k RAM - 8MHz
>
> Net-Tamer V 1.11.2X - Registered
>
> To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
> unsubscribe SURVPC in the body of the message.
> Also, trim this footer from any quoted replies.
> More info can be found at;
> http://www.softcon.com/archives/SURVPC.html
To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
unsubscribe SURVPC in the body of the message.
Also, trim this footer from any quoted replies.
More info can be found at;
http://www.softcon.com/archives/SURVPC.html
