This what it looks on boot-up. It a few more messages after this, but this is
the jist of the detection. No mention of scd?, just the sr?.
Steve
<6>(scsi0) <Adaptec AHA-294X SCSI host adapter> found at PCI 13/0
<6>(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
<6>(scsi0) Downloading sequencer code... 412 instructions downloaded
<4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.10/3.2.4
<4> <Adaptec AHA-294X SCSI host adapter>
<4>scsi : 1 host.
<4> Vendor: FUJITSU Model: M2694EQ-512 Rev: 4105
<4> Type: Direct-Access ANSI SCSI revision: 02
<4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
<6>(scsi0:0:0:0) Synchronous at 20.0 Mbyte/sec, offset 8.
<4> Vendor: CONNER Model: CFP2107E 2.14GB Rev: 1524
<4> Type: Direct-Access ANSI SCSI revision: 02
<4>Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
<6>(scsi0:0:1:0) Synchronous at 20.0 Mbyte/sec, offset 8.
<4> Vendor: iomega Model: jaz 1GB Rev: H$70
<4> Type: Direct-Access ANSI SCSI revision: 02
<4>Detected scsi removable disk sdc at scsi0, channel 0, id 2, lun 0
<4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
<4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 1
<4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr2 at scsi0, channel 0, id 3, lun 2
<4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr3 at scsi0, channel 0, id 3, lun 3
<4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr4 at scsi0, channel 0, id 3, lun 4
<4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision:
02<4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lu
n 0
<4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Detected scsi CD-ROM sr5 at scsi0, channel 0, id 3, lun 5
<4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
<4> Type: CD-ROM ANSI SCSI revision: 02
On 27-Mar-99 zentara wrote:
>
> [EMAIL PROTECTED] wrote:
>>
>> That is correct. I do compile that into the kernel, but that is only so I
>> can
>> use all 6 CD drives. Each one has to be setup a Logical Unit Number in
>> order
>> to be accessible.
> >>
>
> I have no experience with 6-pack cd's. But going from
> what I've seen with cdda2wav, you need to specify
> (Bus,ID,Lun) to get to your 6 different cd's.
>
> I'm just curious, at your boot time when your
> scsi bus is probed, does it report just scd0,
> or scd0 thru scd5 ?
>
>
> --
> To get out of this list, please send email to [EMAIL PROTECTED] with
> this text in its body: unsubscribe suse-linux-e
> Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
> archive at http://www.suse.com/Mailinglists/suse-linux-e/index.html
----------------------------------
E-Mail: [EMAIL PROTECTED]
Date: 27-Mar-99
Time: 15:46:36
This message was sent by XFMail
----------------------------------
--
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archive at http://www.suse.com/Mailinglists/suse-linux-e/index.html
