[EMAIL PROTECTED] wrote:
>
It looks like you have it. Have you tried to mount
" mount -t iso9660 /dev/sr0 /cd1
mount -t iso9660 /dev/sr1 /cd2
....
....
etc.
If that works, then just put entries in /etc/fstab.
If it dosn't work you need to find what you have to link
the /dev/sr* to, to get a mount to work.
> This what it looks on boot-up. It a few more messages after this, but this is
> the jist of the detection. No mention of scd?, just the sr?.
> <4>Detected scsi removable disk sdc at scsi0, channel 0, id 2, lun 0
> <4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
> <4> Type: CD-ROM ANSI SCSI revision: 02
> <4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
> <4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
> <4> Type: CD-ROM ANSI SCSI revision: 02
> <4>Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 1
> <4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
> <4> Type: CD-ROM ANSI SCSI revision: 02
> <4>Detected scsi CD-ROM sr2 at scsi0, channel 0, id 3, lun 2
> <4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
> <4> Type: CD-ROM ANSI SCSI revision: 02
> <4>Detected scsi CD-ROM sr3 at scsi0, channel 0, id 3, lun 3
> <4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
> <4> Type: CD-ROM ANSI SCSI revision: 02
> <4>Detected scsi CD-ROM sr4 at scsi0, channel 0, id 3, lun 4
> <4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
> <4> Type: CD-ROM ANSI SCSI revision:
> 02<4>Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lu
> n 0
> <4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
> <4> Type: CD-ROM ANSI SCSI revision: 02
> <4>Detected scsi CD-ROM sr5 at scsi0, channel 0, id 3, lun 5
> <4> Vendor: PIONEER Model: CD-ROM DRM-624X Rev: 1.03
> <4> Type: CD-ROM ANSI SCSI revision: 02
--
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archive at http://www.suse.com/Mailinglists/suse-linux-e/index.html
