I see the cs4321 is listed under Linux/sparc audio subsystem (experimental). If you have access to either a CS4280, 4281, or possibly an Esoniq 1370, they may work. I would recommend compiling those into the kernel. Also, check out the sound section of the kernel config and see if any thing you have access to will compile. Stay away from the oss drivers though.
> _________________________________________________________ > Davin Carter > Wall Street On Demand > > [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > phone 303.417.9999 x205 > fax 303.440.2982 > > > -----Original Message----- From: Scott A Micciche [mailto:[EMAIL PROTECTED]] Sent: Saturday, June 22, 2002 10:27 AM To: Davin Carter Cc: 'Scott Micciche'; Martin Herren; [EMAIL PROTECTED] Subject: RE: [suse-sparc] Audio working on a Blade 100? Tips please. The sound device is the CS4321, standard on-board audio chipset. I don't think anyone has successfully gotten it to work, although the kernel will compile without a hitch when it is chosen specifically. Nothing but hiss ... same on my ultra 5 as well with a similar chipset... On Sat, 22 Jun 2002, Davin Carter wrote: > Date: Sat, 22 Jun 2002 10:18:18 -0600 > From: Davin Carter <[EMAIL PROTECTED]> > To: 'Scott Micciche' <[EMAIL PROTECTED]>, > Martin Herren <[EMAIL PROTECTED]> > Cc: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> > Subject: RE: [suse-sparc] Audio working on a Blade 100? Tips please. > > What soundcard are you using? I would be interested to see if anyone is > using the crystal cs428x cards on sparc hardware. There are a few > soundcards that seem to compile on later kernels. > Also, what sort of chip do the sparc workstations use? > > > _________________________________________________________ > > Davin Carter > > Wall Street On Demand > > > > [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > phone 303.417.9999 x205 > > fax 303.440.2982 > > > > > > > > > -----Original Message----- > From: Scott A Micciche [mailto:[EMAIL PROTECTED]] > Sent: Saturday, June 22, 2002 9:29 AM > To: Martin Herren > Cc: [EMAIL PROTECTED] > Subject: Re: [suse-sparc] Audio working on a Blade 100? Tips please. > > > Just as a side note, I've never gotten linux sparc audio working on my > ultra 2 with any kernel. All I hear is a hissing sound from any digital > source. I'm not sure if the kernel truly supports it or not. I gave up > on it and just plugged my speakers into the headphone jack of the cdrom > to listen to music occasionally. > > On Sat, 22 Jun 2002, Martin Herren wrote: > > > Date: Sat, 22 Jun 2002 02:38:37 +0200 > > From: Martin Herren <[EMAIL PROTECTED]> > > To: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> > > Subject: Re: [suse-sparc] Audio working on a Blade 100? Tips please. > > > > Christian Langnickel wrote: > > > > > > The sound driver in kernel 2.4.14 is broken. > > > I think the best solution would be to install kernel 2.4.19pre10. Is > there > > > anybody > > > who has succeeded in compiling that kernel ? > > > If yes, could you put it on a ftp server, where I could download it? > > > > config of a 2.4.19-pre10 kernel which runs for me on a Blade 100: > > ftp://ftp.on-the-web.ch/.config > > > > there is also a kernel and a system.map file on the server, but not the > > modules, so the best would be to use the .config file and use it to > > build your own kernel (i don't remember if i got sound support in the > > kernel, as i don't need it). > > > > /Martin > > > > -- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > I firmly believe that any man's finest hour - his greatest fulfillment to > all he holds dear... > is that moment when he has worked his heart out in a good cause and lies > exhausted on the field of battle - victorious.... > > - Vince Lombardi > > > -- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > I firmly believe that any man's finest hour - his greatest fulfillment to all he holds dear... is that moment when he has worked his heart out in a good cause and lies exhausted on the field of battle - victorious.... - Vince Lombardi -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
