Dear listmembers,
today I had an unexpected system crash - unfortunately I cannot give more
than this information. The system froze entirely, the last messages in
/var/log/warn:
Dec 12 09:59:11 oekalux08 kernel: RPC: garbage, exit EIO
Dec 12 09:59:11 oekalux08 kernel: nfs_read_super: get root_inode failed
Dec 12 09:59:11 oekalux08 kernel: nfs warning: mount version older than
kernel
Dec 12 10:08:31 oekalux08 kernel: Unable to handle kernel request at virtual
address 0000000000010000
Then the reboot starts again. Other messages are:
Error reading kernel symbols - Cannot allocate memory
and
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
The letter might be caused by the fact that the root - fs has not been
mounted at that time. There are other messages I would not assume to be of
significance this time. Any ideas? Help is highly appreciated. I have a
feeling that there is somethin out of order with nfs. I use a Ultra 60 with
dual processor.
Many thanks in advance,
take care
Dieter Jurzitza
--
________________________________________________
HARMAN BECKER AUTOMOTIVE SYSTEMS
Dr.-Ing. Dieter Jurzitza
Manager Hardware Systems
ESI
Industriegebiet Ittersbach
Becker-G�ring Str. 16
D-76307 Karlsbad / Germany
Phone: +49 (0)7248 71-1577
Fax: +49 (0)7248 71-1216
eMail: [EMAIL PROTECTED]
Internet: http://www.becker.de
> -----Original Message-----
> From: Jurzitza, Dieter [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, December 11, 2002 7:44 AM
> To: [EMAIL PROTECTED]
> Subject: [suse-sparc] NCPFS
>
>
> Dear listmembers,
> FYI/To whom it might concern: if anyone of you might want to
> try to use
> ncpfs on Novell on a 64 Bit Ultra Sparc (maybe this holds
> true for other
> systems, too), you *should* upgrade to kernel 2.4.20 & ncpfs-2.0.0.19.
> Otherwise things will fail.
> -> get vanilla 2.4.20,
> -> get ncpfs-src-rpm from the SuSE 8.1 distribution
> and you will be capable to work as you might expect it to. In
> addition,
> there are several useful hints with regard to the basic
> ncpfs-configuration
> that come along with the 8.1-src-distribution
> Take care
>
>
> Dieter Jurzitza
>
> --
> ________________________________________________
>
> HARMAN BECKER AUTOMOTIVE SYSTEMS
>
> Dr.-Ing. Dieter Jurzitza
> Manager Hardware Systems
> ESI
>
> Industriegebiet Ittersbach
> Becker-G�ring Str. 16
> D-76307 Karlsbad / Germany
>
> Phone: +49 (0)7248 71-1577
> Fax: +49 (0)7248 71-1216
> eMail: [EMAIL PROTECTED]
> Internet: http://www.becker.de
>
>
> *******************************************
> Diese E-Mail enthaelt vertrauliche und/oder rechtlich
> geschuetzte Informationen. Wenn Sie nicht der richtige
> Adressat sind oder diese E-Mail irrtuemlich erhalten haben,
> informieren Sie bitte sofort den Absender und vernichten Sie
> diese Mail. Das unerlaubte Kopieren sowie die unbefugte
> Weitergabe dieser Mail ist nicht gestattet.
>
> This e-mail may contain confidential and/or privileged
> information. If you are not the intended recipient (or have
> received this e-mail in error) please notify the sender
> immediately and delete this e-mail. Any unauthorised copying,
> disclosure or distribution of the contents in this e-mail is
> strictly forbidden.
> *******************************************
>
>
> --
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
*******************************************
Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn
Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben,
informieren Sie bitte sofort den Absender und loeschen Sie diese Mail. Das unerlaubte
Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.
This e-mail may contain confidential and/or privileged information. If you are not the
intended recipient (or have received this e-mail in error) please notify the sender
immediately and delete this e-mail. Any unauthorised copying, disclosure or
distribution of the contents in this e-mail is strictly forbidden.
*******************************************
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
