On Tue, 2008-02-26 at 09:16 +0000, Mark Ellis wrote: > On Tue, 2008-02-26 at 00:24 +0000, Philip Aston wrote: > > On Mon, 2008-02-25 at 10:17 +0000, Mark Ellis wrote: > > > On Sun, 2008-02-24 at 14:48 +0000, Philip Aston wrote: > > > > email message attachment, "Forwarded message - RE: pyrapi2" > > > > > -------- Forwarded Message -------- > > > > > From: Philip Aston <[EMAIL PROTECTED]> > > > > > To: Mark Ellis <[EMAIL PROTECTED]> > > > > > Subject: RE: pyrapi2 > > > > > Date: Sun, 24 Feb 2008 14:46:39 +0000 > > > > > > > > > > Clean install Debian Lenny is up & running on another box; due to lack > > > > > of hd space I have gnome and not kdesktop there. synCE software > > > > > installed from apt without difficulty, and I haven't changed > > > > > sources.list. > > > > > > > > > > > So what versions of synce software are you now using ? > > > > > > > > Full list installed from apt, including dependencies: > > agsynce > > > > librapi2 > > > > libsynce0 > > > > libmultisync-plugin-all (these files are 0.82.8) > > > > bluez-audio > > > > bluez-utils > > > > libcurl3 > > > > libmultisync-plugin-backup > > > > libmultisync-plugin evolution > > > > libmultisync-plugin irmc > > > > libmultisync-plugin irmc-bluetooth > > > > libmultisync-plugin opie > > > > libopenobex1 > > > > libssh 2-1 > > > > multisync 0.82.8 > > > > opensync-plugin-evolution 0.19.1+b1 > > > > libopensync0 > > > > syncw-dccm 0.9.1-3 > > Remove synce-dccm, it's obsolete. done > > > > > libraoi2-tools > > > > libsamplerate0 > > > > libsox-fmt-alsa > > > > libsox-fmt-base > > > > libsox0 > > > > sox > > > > synce-kde 0.9.1.1 > > > > libdynamite0 > > > > libmimedir0 > > > > liborange0 > > > > librra0 > > > > libunshield0 > > > > synce-kde-dev 0.9.1.1 (note: includes RAPIP RAKI VDCCM) > > > > synce-multisync-plugin 0.9.0.4 > > > > synce-serial 0.9.1.3.1 > > > > libcap 0.8 > > > > ppp > > > > dhcp3-client > > > > > > > > Ok, I'm going to assume these all come from debian lenny, and you have > no extra repositories listed. Tell me if I'm wrong. > That's correct.
> These packages are very old, but they will suffice depending on what you > want to do. > > > > > > > > > > I'm able to connect with raki from terminal & synce-serial-start from > > > > > root terminal, and am back to "no synchronizer found for..." I think > > > > > appointment is the important one but would like to do contacts if > > > > > poss. > > > > > > > > > > > What dccm are you using ? Does pstatus work ? > > > > > > > I can't locate pstatus in apt & it doesn't work as command, user or > > root, there is no man pstatus on my system. > > > > > > The old debian packages prefixed everything synce-, so it would be > synce-pstatus. Still unable to locate... I used the search on synaptic so anything with pstatus would come up anyway. Is it available on the sid repository? > > > Does the message "no synchronizer found for..." come from raki ? Raki > > > hasn't been maintained for some time. > > > > > > > Yes. Actually I have only ever been able to connect using RAKI. I start > > it first from menu, then synce-serial-start from terminal. > > What daemon should I be using? I see dccm, vdccm, odccm referred to. > > Should I start one of these from terminal? > > > > > > > > > Ksync gets all sorts of errors, multisync doesn't do anthing as a sync > > > > > between winCE device and Ximian Evolution plugin- altho I suspect it > > > > > isn't actually finding my device at all. I'll probably leave this > > > > > method > > > > > alone > > > > > > Back to the does pstatus work question. > > > > > > Ksync I have no idea about. Which multisync are you trying to use, the > > > old 0.82 or the new 0.90 ? 0.90 uses opensync and sync-engine, and does > > > not yet work with WM2003. 0.82 will work, you need the > > > synce-multisync-plugin. Please confirm your connection works first. > > > > > > > I clearly need to go back to the beginning. I have installed the above > > list & not messed with anything else. As I haven't installed RAKI what > > should I use to connect? > > > > Mark, thanks for your patience. If you think I need to read something > > please let me know... just that info on WinCE is a bit specialized and > > hides in odd threads & postings. Eg I probably should have known that > > the svn packages weren't for WinCE 03 devices but just never found that > > essential detail even after much searching. Perhaps at the end of all > > this I'll write a HOWTO! -Phil > > > > I think you just jumped in to the middle a bit, we'll get there in the > end. For instance, everything in svn works fine with 2003 devices, > except sync-engine. > > I think we need to establish exactly what you want to accomplish before > we go any further. I guess you want to sync your PIM items, with what > software on the host ? Evolution ? > Yes, only evolution: contacts,calendar, possibly todo list although not essential. I seldom use it now but have vista as dual boot on this (new) box so could use activesync + outlook if I have to, also I have paired with a work computer to keep a backup, but all other boxes I work with are linux only. File transfer is helpful but I generally use sd card for that. Once again, thanks. I'll be experimenting with the clean install system,as described above, not this one, so any mistakes even to the extent of needing another clean install won't be costly. It's a 1998 AMD266 motherboard with 192k ram, lots of salvaged hardware, works well. -Phil > Mark > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > SynCE-Devel mailing list > SynCE-Devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/synce-devel ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ SynCE-Devel mailing list SynCE-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/synce-devel
