Given current pricing and availability, I'm a big fan of the netgear
WNDR3700 ($139) and 3800 ($150), they are what we used for Scale this year
(the 3800 has more memory)
These are powerful enough to act as a fileserver for you (with an external
USB drive)
These support both 2.4GHz and 5GHz (5GHz is far, far less crowded if your
equipment supports it)
using dd-wrt or openwrt will give you a huge amount of flexibility
compared to any vendor's stock firmware.
one note on the Apple products, I read something a few days ago that IPv6
is being disabled on some of the newer access points, not the right
direction to be going nowdays.
David Lang
On Wed, 18 Apr 2012, unix_fan wrote:
Date: Wed, 18 Apr 2012 23:25:16 -0700 (PDT)
From: unix_fan <[email protected]>
To: Andrew Hume <[email protected]>,
LOPSA Technical Discussions <[email protected]>
Subject: Re: [lopsa-tech] home wifi
I swear by dd-wrt firmware on a COTS router that takes it (in my case, a WRT-54GL). I've had years of trouble free access, not counting the one or two times a year I needed to reboot the unit ("Dad! There's no Internet"), typically winter storms that stress the power infrastructure.
dd-wrt allows you to crank up the power as needed.
I have a house built in 2003, and used to have the AP in the garage near the
FiOS entry point . The farthest point upstairs had a lot of steel and lumber
obstructing it, but an extra 10mw boost made a huge difference. This would make
a difference for all your devices, and it is configurable.
Placement is everything. If you can find a way to bring the AP toward the
center, the difference is dramatic.
Toward that end, since you are loathe to bring in more wiring, check into
powerline ethernet, via standard RJ45 access or via RG6. It has come a long way.
These boxen are a little pricey for leveraging RG6, but I know you are in your
"peak earnings years, Andrew: :-)
http://www.amazon.com/NETGEAR-MCAB1001-Coax-Ethernet-Adapter-Black/dp/B001N85NMI
http://www.vpi.us/eth-coax.html
________________________________
From: Andrew Hume <[email protected]>
To: LOPSA Technical Discussions <[email protected]>
Sent: Wednesday, April 18, 2012 12:57 PM
Subject: [lopsa-tech] home wifi
my airport (b/g) seems to be degrading, so i am looking to revisit my home
networking solution. currently, i have an airport extreme serving a mac mini,
a macbook, a printer and an ipad 3. i also have a express acting as a wireless
bridge to a hub which has a couple of PCs hanging off it.
if you view my house as an approximate square, the airport extreme is in
the SW corner, the airport express is at E. reception for the various ipods
is iffy at the desired locations (SE) and the ipad reception is poor at NW.
reception at the airport express is adequate.
generally, i am pretty happy with apple stuff, but am open to other solutions.
i can, but would rather not, go fishing cables etc. there is a prewired network
of
RG-6 coax that could be used to get signals from teh cable modem (colocated
with teh airport extreme).
any suggestions?
------------------
Andrew Hume (best -> Telework) +1 623-551-2845
[email protected] (Work) +1 973-236-2014
AT&T Labs - Research; member of USENIX and LOPSA
_______________________________________________
Tech mailing list
[email protected]
https://lists.lopsa.org/cgi-bin/mailman/listinfo/tech
This list provided by the League of Professional System Administrators
http://lopsa.org/
_______________________________________________
Tech mailing list
[email protected]
https://lists.lopsa.org/cgi-bin/mailman/listinfo/tech
This list provided by the League of Professional System Administrators
http://lopsa.org/
_______________________________________________
Tech mailing list
[email protected]
https://lists.lopsa.org/cgi-bin/mailman/listinfo/tech
This list provided by the League of Professional System Administrators
http://lopsa.org/
